
Wind breakout
idlehandsdev/wind_breakout
Breakout board for all Adafruit Feather series boards.

An IR remote controller for stepper motor
IRstepper is an open-source printed circuit board by matt199394, from the matt199394/arduinoIRstepperController repository on GitHub. It is a 2-layer board of 45 × 94 mm with 26 parts on 39 nets, routed with 306 tracks and 0 vias.
It is built around the D12. Its parts include 10 connectors, 3 diodes, 1 capacitor, 1 resistor and 1 IC. It belongs with the robots and motor control boards and the AVR (ATmega, ATtiny) boards of this library.
I had the problem to remotely controll the volume of my home-built audio amplifier. For this purpose I created a circuit that allows me to control a stepper motor connected to the amplifier's potentiometer. The stepper motor can be controlled either using the remote control or the rotary encoder. I have to admit it works pretty well :) I hope it's useful for someone!
Link to a brief video demonstration https://www.youtube.com/watch?v=Ed6FCPk_Rfs
Code update: add timer to disable stepper motor after 5 seconds if no change in stepper position
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.7mm_Pad_TopBottom | H1, H2, H3, H4 |
| 2 | 1N5817 | Diode_THT:D_A-405_P7.62mm_Horizontal | D1, D3 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | 390R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | A4988_board | Module:Pololu_Breakout-16_15.2x20.3mm | A1 |
| 1 | Analog_Pins | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J9 |
| 1 | ArduinoProMini | arduino:pro_mini | IC1 |
| 1 | D12 | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
| 1 | D9 | TestPoint:TestPoint_Pad_D1.5mm | TP4 |
| 1 | IR | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | LCD | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J7 |
| 1 | LED | LED_THT:LED_D3.0mm | D2 |
| 1 | LOGO | graphics:cionzi | |
| 1 | Power1 | Connector_BarrelJack:BarrelJack_Horizontal | J6 |
| 1 | Power2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J2 |
| 1 | Power_pins | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J10 |
| 1 | Pw1->Pw2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | RX | TestPoint:TestPoint_Pad_D1.5mm | TP2 |
| 1 | RotaryEnc | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | Stepper | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | TX | TestPoint:TestPoint_Pad_D1.5mm | TP3 |
| 1 | micro-step | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J8 |

idlehandsdev/wind_breakout
Breakout board for all Adafruit Feather series boards.





ashlin4010/pdp-11.40-mini-panel
Included in this repository are the PCB files to make a miniature PDP-11/40 front panel. The board uses a XIAO nrf52840 dev board. No software has been written yet.


It measures 45 × 94 mm and has 2 copper layers, 1.6 mm thick.
26 parts, built around the D12. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the matt199394/arduinoIRstepperController repository on GitHub, at the commit this page was made from: the board is IRstepper/IRstepper.kicad_pcb and its schematic IRstepper/IRstepper.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask matt199394 before reusing the design.