Skip to the content
2 layersWater sensor, the printed circuit board in 3D

Web-based flood safety. Get push notifications when a sensor changes state

Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
31
Pads
41
Tracks, vias
23, 0
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
11 Jan 2024
Updated
3 Oct 2024

Overview

Water sensor is an open-source printed circuit board by matt-robbins, from the matt-robbins/watermon repository on GitHub. It is a 2-layer board with 7 parts on 31 nets, routed with 23 tracks and 0 vias.

Its parts include 3 connectors, 2 resistors, 1 capacitor and 1 transistor. It belongs with the sensors and measurement boards of this library.

Parts

7
QtyValueFootprintReferences
2Conn_01x15_SocketConnector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_VerticalJ2, J3
110MResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2
11nFCapacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mmC1
12k2Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1
1NMOSPackage_TO_SOT_THT:TO-92L_InlineQ1
1Screw_Terminal_01x02TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mmJ1

Similar boards

  • 2 layersEncoder, the printed circuit board in 3D

    Encoder

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    7 parts4.3kMIT
  • 2 layers40 × 20 mmSensor smd, the printed circuit board in 3D

    Sensor smd

    scottbez1/splitflap

    DIY split-flap display

    7 parts4.2k
  • 2 layers19.8 × 30 mmZ limit, the printed circuit board in 3D

    Z limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    7 parts3.7k
  • 2 layers35.6 × 58.2 mmDisplay Carrier, the printed circuit board in 3D

    Display Carrier

    AxxAxx/AxxSolder

    STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power

    7 parts1.7kGPL-3.0
  • 2 layers20.3 × 16.3 mmMap MPX, the printed circuit board in 3D

    Map MPX

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    7 parts1.2k
  • 2 layers26 × 44 mmCompact carrier board, the printed circuit board in 3D

    Compact carrier board

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    7 parts1.1k
  • 2 layers26.4 × 53.8 mmAtari pickup, the printed circuit board in 3D

    Atari pickup

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    7 parts1kGPL-3.0
  • 2 layersRj45 breakout, the printed circuit board in 3D

    Rj45 breakout

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    7 parts990GPL-3.0

Questions

What parts does the Water sensor use?

7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Water sensor KiCad files?

From the matt-robbins/watermon repository on GitHub, at the commit this page was made from: the board is circuit/water_sensor/water_sensor.kicad_pcb and its schematic circuit/water_sensor/water_sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Water sensor design in my own project?

Its repository states no licence, so its author keeps all rights: ask matt-robbins before reusing the design.