2 layers196.7 × 31.5 mm
2 layers23.5 × 56.5 mm
Term4pi
Matir/hacks18Miscellaneous Hacks
- Size
- 23.5 × 56.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 31
- Pads
- 89
- Tracks, vias
- 169, 20
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 19 Oct 2019
- Updated
- 22 Oct 2026
Overview
Term4pi is an open-source printed circuit board by Matir, from the Matir/hacks repository on GitHub, published under the BSD-2-Clause licence. It is a 2-layer board of 23.5 × 56.5 mm with 22 parts on 31 nets, routed with 169 tracks and 20 vias.
It is built around the CP2102N-A01-GQFN24. Its parts include 5 resistors, 4 capacitors, 4 connectors, 2 diodes and 1 IC.
Main components
1Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R2, R5 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2, C4 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C1, C3 |
| 2 | LED | LED_SMD:LED_0603_1608Metric_Castellated | D1, D2 |
| 2 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2 |
| 1 | 22.1k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 47.5k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | CP2102N-A01-GQFN24 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U1 |
| 1 | PWR | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J3 |
| 1 | PiHeader | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical | J2 |
| 1 | TP5v | TestPoint:TestPoint_Pad_D2.5mm | TP1 |
| 1 | TPGND | TestPoint:TestPoint_Pad_3.0x3.0mm | TP4 |
| 1 | TPVBUS | TestPoint:TestPoint_Pad_D2.5mm | TP2 |
| 1 | TPVDD | TestPoint:TestPoint_Pad_D2.5mm | TP3 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J4 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J1 |
More from Matir/hacks
8- 2 layers80 × 80 mm
- 2 layers44.3 × 48.8 mm
- 2 layers46 × 42 mm
- 2 layers51.5 × 44 mm
- 2 layers55 × 96 mm
- 2 layers19.5 × 17.5 mm
- 2 layers32.2 × 28.2 mm
Similar boards
- 6 layers230 × 56 mm
- 4 layers100 × 100 mm
ESP32-Eurorack Audio
ctag-fh-kiel/esp32-eurorack-audio
Open source eurorack audio module based on ESP32
173 parts71 - 4 layers160 × 73.2 mm
MainPCB
doppelgrau/esp32-f9p-io-board
An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V power, three 15V tolerant analog inputs, three 5V tolerant inputs.
162 parts39 - 4 layers69.8 × 69.8 mm
FreeEEG32
neuroidss/FreeEEG32-alpha1.0
ALPHA1.0 TEST FAILED, USE NEW VERSION INSTEAD FreeEEG32 alpha1.0 32 channels mobile electroencephalography under GNU AGPL 24 bits, 4kSPS ADCs 4x AD7770 MCU STM32F427ZI WIFI ESP-12F (ESP8266) USB CP2102N Accel & hyro…
217 parts39AGPL-3.0 - 2 layers136 × 58 mm
- 2 layers35 × 18 mm
- 2 layers100 × 99.2 mm
Usb serial interface panelized
willemcvu/midi-solenoid-driver
A set of PCBs to drive solenoids using MIDI data, for use in automating musical instruments.
114 parts21MIT - 2 layers65 × 56 mm
Questions
How big is the Term4pi PCB?
It measures 23.5 × 56.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Term4pi use?
22 parts, built around the CP2102N-A01-GQFN24. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Term4pi KiCad files?
From the Matir/hacks repository on GitHub, at the commit this page was made from: the board is pcbs/term4pi/term4pi.kicad_pcb and its schematic electronics/wiretest/wiretest/wiretest.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Term4pi design in my own project?
Its repository publishes it under the BSD-2-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).