

T3-harness adapter
KiCAD project used for a t3 cabling harness adapter
- Size
- 61.9 × 65 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 112
- Pads
- 170
- Tracks, vias
- 167, 12
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 18 May 2026
- Updated
- 18 May 2026
Overview
T3-harness adapter is an open-source printed circuit board by MatiMcFly, from the MatiMcFly/t3-harness-adapter repository on GitHub. It is a 2-layer board of 61.9 × 65 mm with 13 parts on 112 nets, routed with 167 tracks and 12 vias.
It belongs with the interfaces and adapters boards of this library.
README
readme.mdT3 Wiring harness adapter
This KiCAD project contains an adapter which can be used to retrieve the electrical signals from a VW T3 wiring harness.
The PCB has a board edge connector which adapts to the T3 dash wiring harness plug. All signals available are routed to pin headers for usage with other electronics, such as a STM32 development kit.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | Conn_01x14_Pin | Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_Vertical | J2, J3, J6, J7, J8, J9, J10, J11, J12, J13 |
| 2 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J4, J5 |
| 1 | Conn_01x14_Pin | aa_local_lib:t3-harness-edge | J1 |
Similar boards
- 2 layers40 × 20 mm

- 2 layers74.9 × 49.5 mm

- 2 layers35 × 29 mm

MagSpoofTC
samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.
13 parts4.2k - 2 layers20.6 × 23.6 mm

AO-03 signal amplifier
fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments
13 parts1.6kApache-2.0 - 2 layers47 × 35.6 mm

- 2 layers95 × 95 mm

Cube batteryboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
13 parts1.1kGPL-3.0 - 2 layers15.2 × 20.3 mm

Pt100stick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
13 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
13 parts1kGPL-3.0
Questions
How big is the T3-harness adapter PCB?
It measures 61.9 × 65 mm and has 2 copper layers, 1.6 mm thick.
What parts does the T3-harness adapter use?
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the T3-harness adapter KiCad files?
From the MatiMcFly/t3-harness-adapter repository on GitHub, at the commit this page was made from: the board is t3-harness-adapter/t3-harness-adapter.kicad_pcb and its schematic t3-harness-adapter/t3-harness-adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the T3-harness adapter design in my own project?
Its repository states no licence, so its author keeps all rights: ask MatiMcFly before reusing the design.