2 layers76 × 63.5 mm
PicoTracker
xiphonics/picoTracker-pcb
Buy the official kit at xiphonics store # Trademark Notice
98 parts36CC0-1.0
2 layers24.6 × 51 mm
Shaw
matepnew/shawDevboard based on the Blueprint guides to learn basics of electronics and PCB design
- Size
- 24.6 × 51 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 63
- Pads
- 238
- Tracks, vias
- 492, 51
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 8 Oct 2025
- Updated
- 13 Nov 2025
Overview
Shaw is an open-source printed circuit board by matepnew, from the matepnew/shaw repository on GitHub. It is a 2-layer board of 24.6 × 51 mm with 46 parts on 63 nets, routed with 492 tracks and 51 vias.
It is built around the RP2040, W25Q16JVSSIQ and BQ24074RGTR. Its parts include 20 capacitors, 13 resistors, 5 connectors, 4 ICs and 2 diodes. It belongs with the microcontroller boards boards and the RP2040 boards of this library.
Main components
3
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q16JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 10uA 133MHz 16Mbit 2.7V~3.6V 20 Years 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
BQ24074RGTR
QFN-16-EP(3x3)-40℃~+125℃ 1 1.5A 4.2V 4.35V~10.2V 6.5uA Charging IC Lithium Battery Not supported Support QFN-16-EP(3x3) Battery Management ROHSTexas InstrumentsBattery Management
README
README.mdSHAW!
Devboard based on the Blueprint guides to learn basics of electronics and PCB design.
PCB
Schematic
PCB layout
3D Model
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C17 |
| 3 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C12, C18 |
| 2 | 1.5K | Resistor_SMD:R_0402_1005Metric | R8, R9 |
| 2 | 10K | Resistor_SMD:R_0402_1005Metric | R6, R13 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C13, C14 |
| 2 | 1K | Resistor_SMD:R_0402_1005Metric | R5, R7 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 33pF | Capacitor_SMD:C_0402_1005Metric | C15, C16 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C19, C20 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | Conn_01x20 | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J2, J3 |
| 2 | LED | LED_SMD:LED_0402_1005Metric | D1, D2 |
| 1 | 1.13K | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | 1.18K | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 4.12K | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | BQ24074RGT | Package_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm | U4 |
| 1 | Conn_01x02 | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | MCP1700x-330xxTT | Package_TO_SOT_SMD:SOT-23 | U2 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | W25Q16JVSS | Package_SON:Winbond_USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mm | U3 |
Questions
How big is the Shaw PCB?
It measures 24.6 × 51 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Shaw use?
46 parts, built around the RP2040, W25Q16JVSSIQ and BQ24074RGTR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Shaw KiCad files?
From the matepnew/shaw repository on GitHub, at the commit this page was made from: the board is hardware/shaw.kicad_pcb and its schematic hardware/shaw.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Shaw design in my own project?
Its repository states no licence, so its author keeps all rights: ask matepnew before reusing the design.
Similar boards
- 4 layers90.8 × 121.7 mm
- 4 layers81 × 37 mm
Maidenhead pocket locator
EdmundLimBoEn/gps-maidenhead-device
Open-source portable GNSS Maidenhead grid locator with a 16x2 LCD
117 parts - 2 layers21 × 51 mm
Kicad Design Files
hashim-cpro/Custom-RP2040-based-Devboard
This is a rp2040 based devboard based on the pico dimensions with complete battery management!
52 parts - 4 layers65 × 20 mm
- 4 layers299 × 127 mm
- 2 layers285 × 94.6 mm
- 2 layers25.4 × 54.5 mm
Rpi pico debugger shoe
ShawnHymel/rpi-pico-debugger-shoe
Stackable debugger board for the Raspberry Pi Pico. Solder long headers to this debugger board in order to connect the Pico to it.
49 parts84