
ESP32 Transmitter and Receiver
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

.
Mateo relay is an open-source printed circuit board by mateogmzu, from the mateogmzu/Relay_wifi repository on GitHub. It is a 2-layer board of 92.1 × 78.5 mm with 48 parts on 62 nets, routed with 197 tracks and 8 vias.
Its parts include 16 resistors, 8 diodes, 6 ICs, 5 connectors and 4 transistors. It belongs with the home automation and IoT boards and the ESP32 boards of this library.
"# Relay_wifi"
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 510 | Resistor_SMD:R_0805_2012Metric | R3, R4, R5, R6, R11, R12, R13, R14 |
| 4 | 1K | Resistor_SMD:R_0805_2012Metric | R7, R8, R15, R16 |
| 4 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R2, R9, R10 |
| 4 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 4 | D | Diode_SMD:D_0805_2012Metric | D2, D4, D6, D8 |
| 4 | LED | LED_SMD:LED_0805_2012Metric | D1, D3, D5, D7 |
| 4 | PC817 | EESTN5:DIP-4_PC817 | U1, U2, U4, U5 |
| 4 | RELAY_C | EESTN5:Relay_C | K1, K2, K3, K4 |
| 4 | Screw_Terminal_01x03 | EESTN5:BORNERA3_AZUL | J1, J2, J3, J4 |
| 2 | u0.1 | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 1 | ESP32_DevKit_V1_CH9102X | EESTN5:ESP32_DevKit_V1_CH9102X | U7 |
| 1 | Jumper_2_Bridged | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | LM7805_TO220 | Package_TO_SOT_SMD:TO-263-2 | U6 |
| 1 | LOGO | er:peppa | G*** |
| 1 | LOGO | er:bat | G*** |
| 1 | Screw_Terminal_01x02 | EESTN5:BORNERA2_AZUL | J5 |

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing



softerhardware/Hermes-Lite2
A second generation low-cost amateur HF software defined radio transceiver.

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

loxodes/vna
Under development open hardware microwave vector network analyzer

fellesverkstedet/fabricatable-machines
Motion systems for flexible digital fabrication and research. Easy to fabricate and customize. Documentation: https://github.com/fellesverkstedet/fabricatable-machines/wiki
It measures 92.1 × 78.5 mm and has 2 copper layers, 1.6 mm thick.
48 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mateogmzu/Relay_wifi repository on GitHub, at the commit this page was made from: the board is HARDWARE/mateo_relay/mateo_relay.kicad_pcb and its schematic HARDWARE/mateo_relay/mateo_relay.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask mateogmzu before reusing the design.