

Four Step Sequencer
these are some pcbs :~)
- Size
- 69.9 × 37.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 32
- Pads
- 102
- Tracks, vias
- 185, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 14 Dec 2020
- Updated
- 13 Jun 2022
Overview
Four Step Sequencer is an open-source printed circuit board by masonandrewmann, from the masonandrewmann/modular-synth-pcbs repository on GitHub. It is a 2-layer board of 69.9 × 37.6 mm with 44 parts on 32 nets, routed with 185 tracks and 0 vias.
Its parts include 15 resistors, 13 connectors, 6 capacitors, 6 diodes and 2 ICs.
README
README.mdA collection of PCBs I've designed since getting into DIY modular synths. Do not assume that any of these designs work or are good, many of them have errors I have not fixed yet. If you want to get some manufactured, go ahead but I'd urge you to contact me first and I can let you know any quirks of the board first! :~)
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1N4148 | Diode_THT:D_T-1_P5.08mm_Horizontal | D1, D2, D3, D4, D5, D6 |
| 4 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7, R8, R9, R10 |
| 4 | 30k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11, R12, R13, R14 |
| 3 | 0.01u | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C4, C5, C6 |
| 3 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3, R5 |
| 2 | 10u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C2, C3 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6, R15 |
| 1 | +12V_Conn | Connector_Wire:SolderWirePad_1x02_P3.81mm_Drill1mm | J3 |
| 1 | -12V_Conn | Connector_Wire:SolderWirePad_1x02_P3.81mm_Drill1mm | J5 |
| 1 | 15k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 1a | Connector_Wire:SolderWirePad_1x01_Drill1mm | J6 |
| 1 | 1w | Connector_Wire:SolderWirePad_1x01_Drill1mm | J10 |
| 1 | 2a | Connector_Wire:SolderWirePad_1x01_Drill1mm | J7 |
| 1 | 2w | Connector_Wire:SolderWirePad_1x01_Drill1mm | J11 |
| 1 | 3a | Connector_Wire:SolderWirePad_1x01_Drill1mm | J8 |
| 1 | 3w | Connector_Wire:SolderWirePad_1x01_Drill1mm | J12 |
| 1 | 4017 | Package_DIP:DIP-16_W7.62mm_Socket | U2 |
| 1 | 47k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 47p | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 4a | Connector_Wire:SolderWirePad_1x01_Drill1mm | J9 |
| 1 | 4w | Connector_Wire:SolderWirePad_1x01_Drill1mm | J13 |
| 1 | CK_In | Connector_Wire:SolderWirePad_1x01_Drill1mm | J1 |
| 1 | CV_Out | Connector_Wire:SolderWirePad_1x01_Drill1mm | J2 |
| 1 | GND_Conn | Connector_Wire:SolderWirePad_1x02_P3.81mm_Drill1mm | J4 |
| 1 | TL074 | Package_DIP:DIP-14_W7.62mm_Socket | U1 |
The 42 most common of 44 parts.
More from masonandrewmann/modular-synth-pcbs
12- 2 layers176.3 × 101.6 mm

- 2 layers80.8 × 112.5 mm

- 2 layers110.2 × 116.8 mm

- 2 layers115.3 × 110 mm

Dual Universal Slope Generator - CGS
masonandrewmann/modular-synth-pcbs
these are some pcbs :~)
149 parts1 - 2 layers94.5 × 109.2 mm

- 2 layers84.1 × 65.5 mm

- 2 layers127 × 101.6 mm

- 2 layers110.5 × 54.1 mm

- 2 layers113.5 × 63.5 mm

Smooth and Stepped Generator - CGS
masonandrewmann/modular-synth-pcbs
these are some pcbs :~)
112 parts1 - 2 layers

- 2 layers127 × 101.6 mm

- 2 layers101.6 × 127 mm

Similar boards
- 2 layers78 × 60 mm

- 2 layers115 × 14.5 mm

- 2 layers37.7 × 20 mm

- 2 layers88.9 × 88.4 mm

- 2 layers125 × 98 mm

3-in-1
mudmin/AnotherMaker
This is where I will store code snippets for AnotherMaker Videos
44 parts258 - 2 layers65 × 56.5 mm

RPiG3iMac
qbancoffee/imac_g3_ivad_board_init
iMac G3 IVAD board initialization with an arduino
44 parts240LGPL-3.0 - 2 layers54.4 × 49.3 mm

Fx3 tn20k adapter
Stefan-Olt/MISRC
MISRC Is a multi channel RF capture device for FM RF, S-Video, CVBS RAW capture and anything else, but intended and supported for the decode family of projects vhs-decode, ld-decode, hifi-decode.
44 parts236CC-BY-4.0 - 2 layers250 × 32 mm

Questions
How big is the Four Step Sequencer PCB?
It measures 69.9 × 37.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Four Step Sequencer use?
44 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Four Step Sequencer KiCad files?
From the masonandrewmann/modular-synth-pcbs repository on GitHub, at the commit this page was made from: the board is My Stuff/Four_Step_Sequencer/Four_Step_Sequencer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Four Step Sequencer design in my own project?
Its repository states no licence, so its author keeps all rights: ask masonandrewmann before reusing the design.