4 layers88.9 × 50.8 mm
BackupProjects ethanzhou100 personal 0 20240909
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
5 parts915
4 layers35 × 25 mm
DistributionBoard
masakinumata/Others- Size
- 35 × 25 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 5
- Nets
- 2
- Pads
- 10
- Tracks, vias
- 0, 41
- Pours
- 2
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 7 Feb 2026
- Updated
- 30 Mar 2026
Overview
DistributionBoard is an open-source printed circuit board by masakinumata, from the masakinumata/Others repository on GitHub, published under the MIT licence. It is a 4-layer board of 35 × 25 mm with 5 parts on 2 nets.
README
README.mdOthers
Parts
5| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | IN | Connector_Wire:SolderWire-0.15sqmm_1x02_P4mm_D0.5mm_OD1.5mm | J103 |
| 1 | LOGO | Library:wasa_10mm | G*** |
| 1 | OUT1 | Connector_Wire:SolderWire-0.15sqmm_1x02_P4mm_D0.5mm_OD1.5mm | J101 |
| 1 | OUT2 | Connector_Wire:SolderWire-0.15sqmm_1x02_P4mm_D0.5mm_OD1.5mm | J102 |
The 4 most common of 5 parts.
Similar boards
- 4 layers28.5 × 28 mm
- 4 layers16 × 13.2 mm
- 4 layers105 × 36 mm
- 4 layers22.4 × 46.8 mm
- 4 layers108 × 31.8 mm
Simm72 ram 16M55
agranlund/raven
Homemade MC68060 + DSP56303 Atari-compatible computer. Hardware, firmware, and software stack
5 parts87 - 4 layers35.1 × 25.3 mm
T41-si5340-Oscillator daughterboard
DRWJSCHMIDT/T41
This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.
5 parts66 - 4 layers37.5 × 25.5 mm
Coupler nightly
matthuszagh/fmcw
6GHz frequency-modulated continuous-wave radar with real-time range detection
5 parts66Apache-2.0
Questions
How big is the DistributionBoard PCB?
It measures 35 × 25 mm and has 4 copper layers, 1.6 mm thick.
What parts does the DistributionBoard use?
5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DistributionBoard KiCad files?
From the masakinumata/Others repository on GitHub, at the commit this page was made from: the board is hardware/DistributionBoard/DistributionBoard.kicad_pcb and its schematic hardware/Breakout/IMU/BMI323_BMM350/BMI323_BMM350.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DistributionBoard design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).