2 layers65 × 30 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
33 parts1kGPL-3.0
2 layers75 × 85 mm
Raspberry pi hat
MartinNievas/raspberry-pi-teaching-hat1Placa diseñada especialmente con fines educativos, para permitir un aprendizaje rápido y fácil de los conceptos de programación utilizados en la materia informática 1
- Size
- 75 × 85 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 48
- Pads
- 113
- Tracks, vias
- 192, 7
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 2 Jul 2019
- Updated
- 14 Oct 2022
Overview
Raspberry pi hat is an open-source printed circuit board by MartinNievas, from the MartinNievas/raspberry-pi-teaching-hat repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 75 × 85 mm with 33 parts on 48 nets, routed with 192 tracks and 7 vias.
Its parts include 14 resistors, 8 diodes, 4 connectors, 3 capacitors and 3 switches.
README
README.mdraspberry-pi-teaching-hat
Pinout
Programa de ejemplo
Un programa de ejemplo se encuentra en la carpeta lib/
Ejecutar:
gcc ejemplo.c && sudo ./a.outNota: sudo es necesario para acceder al pinout.
Para más información ir a la Wiki
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 820 | Resistor_THT:R_BIG_Axial_DIN0207 | R7, R8, R9, R10, R11, R12, R13, R14 |
| 8 | LED_V | LED_THT:LED_D5.0mm | D1, D2, D3, D4, D5, D6, D7, D8 |
| 3 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R3, R5 |
| 3 | 100nF | capacitors:cnp_6mm_disc | C1, C2, C3 |
| 3 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R4, R6 |
| 3 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3 |
| 1 | I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | IMU | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | LOGO | lib_fp:rasp | G*** |
| 1 | PWM | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J4 |
| 1 | Raspberry_Pi_2_3 | lib_fp:Pin_Header_Straight_2x20 | J3 |
Questions
How big is the Raspberry pi hat PCB?
It measures 75 × 85 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Raspberry pi hat use?
33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Raspberry pi hat KiCad files?
From the MartinNievas/raspberry-pi-teaching-hat repository on GitHub, at the commit this page was made from: the board is pcb/raspberry_pi_hat/raspberry_pi_hat.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Raspberry pi hat design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers127 × 96 mm
Amiga gfxcard
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
33 parts1k - 2 layers92.7 × 58.4 mm
Hacky holidays
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
33 parts915 - 2 layers240 × 120 mm
Quiver PDB 01
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
33 parts617CERN-OHL-S-2.0 - 2 layers75 × 26 mm
DIY detector
ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
33 parts558BSD-2-Clause - 2 layers100 × 50 mm
Pixelix
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.
33 parts447MIT - 2 layers99.1 × 71.1 mm
CONTROLLER Standby Instrument
jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository
33 parts431 - 2 layers65 × 30 mm
