
Type e
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Animal Crossing Fossil PCB
Fossil PCB is an open-source printed circuit board by martinbros, from the martinbros/Fossil-PCB repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 62.1 × 62.3 mm with 16 parts on 8 nets, routed with 36 tracks and 0 vias.
Its parts include 4 resistors, 4 diodes and 1 connector.
Animal Crossing Fossil PCB
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | LED | LED_SMD:LED_2512_6332Metric_Pad1.52x3.35mm_HandSolder | D1, D2, D3, D4 |
| 4 | R | Resistor_SMD:R_1210_3225Metric_Pad1.42x2.65mm_HandSolder | R1, R2, R3, R4 |
| 2 | MountingHole_Pad | customParts:SMD_2x5mm | H6, H7 |
| 1 | Conn_01x02_Male | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J1 |
| 1 | MountingHole | fossilFootprint:fossilEdge | H2 |
| 1 | MountingHole | fossilFootprint:fossilMasklessFront | H4 |
| 1 | MountingHole | fossilFootprint:fossilSlikscreen | H5 |
| 1 | MountingHole | fossilFootprint:fossilCopperFill | H1 |
| 1 | MountingHole | fossilFootprint:fossilMasklessBack | H3 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 62.1 × 62.3 mm and has 2 copper layers, 1.6 mm thick.
16 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the martinbros/Fossil-PCB repository on GitHub, at the commit this page was made from: the board is kiCad/fossilPCB.kicad_pcb and its schematic kiCad/fossilPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).