2 layers30 × 61.3 mm
2 layers131.2 × 77.2 mm
MintySynth
marsfactory/mintysynth-version2Rediseño de pcb del proyecto original de Andrew Mowry disponible en https://mintysynth.com/
- Size
- 131.2 × 77.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 45
- Nets
- 43
- Pads
- 142
- Tracks, vias
- 453, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Mar 2020
- Updated
- 27 Mar 2020
Overview
MintySynth is an open-source printed circuit board by marsfactory, from the marsfactory/mintysynth-version repository on GitHub. It is a 2-layer board of 131.2 × 77.2 mm with 45 parts on 43 nets, routed with 453 tracks and 0 vias.
It is built around the EG2211A. Its parts include 7 resistors, 6 switches, 4 diodes, 3 connectors and 2 capacitors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdmintysynth-version
Rediseño de pcb del proyecto original de Andrew Mowry disponible en https://mintysynth.com/
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | R_POT | Potentiometers:Potentiometer_Omeg_PC16PU_Horizontal_MountLS | RV1, RV2, RV3, RV4, RV5 |
| 5 | SW_Push | SeleccionDeComponentes:SW_PUSH_6mm | SW1, SW2, SW3, SW4, SW5 |
| 4 | 220E | SeleccionDeComponentes:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R6, R9 |
| 1 | 100nF | SeleccionDeComponentes:C_Disc_D3.8mm_W2.6mm_P2.50mm | C1 |
| 1 | 100uF | SeleccionDeComponentes:CP_Radial_D5.0mm_P2.50mm | C2 |
| 1 | 10K | SeleccionDeComponentes:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 1K | SeleccionDeComponentes:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | AUDIO_JACK_3.5MM_KIT | SeleccionDeComponentes:AUDIO-JACK-KIT | J5 |
| 1 | Arduino_Nano_v3.x | Modules:Arduino_Nano | A1 |
| 1 | Conn_01x02_BatteryIN | Connectors_SparkFun:1X02 | J3 |
| 1 | Conn_01x03_MIDI OUT | Connectors_SparkFun:1X03_LOCK | J2 |
| 1 | EG2211A | SamacSys_Parts:EG2211A | S1 |
| 1 | ExtraLed ( D12 ) | SeleccionDeComponentes:LED_D5.0mm | D3 |
| 1 | ExtraLed (D6) | SeleccionDeComponentes:LED_D5.0mm | D6 |
| 1 | LED RED | SeleccionDeComponentes:LED_D5.0mm | D1 |
| 1 | LED YELLOW | SeleccionDeComponentes:LED_D5.0mm | D2 |
| 1 | LOGO | drawing:F.Silk_g16838 | G*** |
| 1 | MountingHole_4.3mm_M4_DIN965 | Mounting_Holes:MountingHole_4.3mm_M4_DIN965 | e |
| 1 | R_PHOTO | Opto-Devices:Resistor_LDR_5x4.1_RM3 | R5 |
The 30 most common of 45 parts.
Questions
How big is the MintySynth PCB?
It measures 131.2 × 77.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MintySynth use?
45 parts, built around the EG2211A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MintySynth KiCad files?
From the marsfactory/mintysynth-version repository on GitHub, at the commit this page was made from: the board is KiCad Proyecto/MintySynth.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MintySynth design in my own project?
Its repository states no licence, so its author keeps all rights: ask marsfactory before reusing the design.
Similar boards
- 2 layers97 × 78.5 mm
Dumbpad
imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro
45 parts517GPL-2.0 - 2 layers49.8 × 88.9 mm
- 2 layers26.5 × 34.4 mm
PicoLoaderNSB
makeo/PicoLoader
A cheap and easy to install modchip for the Nintendo GameCube!
45 parts320GPL-2.0 - 2 layers40.2 × 19 mm
- 2 layers63.5 × 63.5 mm
Main pcb
peterkrull/quad
Firmware, hardware and documentation for my autonomous quad copter project
45 parts210GPL-3.0 - 2 layers99.1 × 81.9 mm
RC6502 Terminal
tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!
45 parts193GPL-3.0 - 2 layers116.1 × 94.7 mm
