Skip to the content
4 layers88.9 × 44.5 mmPowerShuffler2, the printed circuit board in 3D

Dual HV isolated DC-DC charger PCBA for balancing weak cells within a large battery stack of Li-Ion cells.

Size
88.9 × 44.5 mm
Copper layers
4
Thickness
1.6 mm
Parts
88
Nets
56
Pads
244
Tracks, vias
462, 63
Pours
23
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
31 May 2020
Updated
8 Nov 2020

Overview

PowerShuffler2 is an open-source printed circuit board by marmot-innovations, from the marmot-innovations/PowerShuffler2 repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 88.9 × 44.5 mm with 88 parts on 56 nets, routed with 462 tracks and 63 vias.

It is built around the SPBW03G-12, MCP6401-E/LT and 74AHC1G14GV, with the MCP73831 and SN74LVC2G08DCT among its other parts. Its parts include 30 capacitors, 25 resistors, 11 ICs, 7 switches and 5 connectors. It belongs with the power boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

5

README

PowerShuffler2PCB/README.md

PowerShuffler 2.0 PCB design schematic, layout, Gerbers, and BOM

KiCAD 5.0.0 for PCB design
Microsoft Excel web for BOM
No 3D model
No XY pick and place Centroid
No ODB++
No footprint library
No schematic library

Design bugs and comments:

  1. To program master MCU, remove R6 and C7 first, then replace them once programming is completed. These components will put too much load on ISP TPI programmer.
  2. To program client MCU, remove C24 and R22 first, then replace them once completed. These components will put too much load on ISP TPI programmer.
  3. J2 and J4 do not need soldered headers for programming. Just shove a 5-pin 0.1" straight strip header into it to establish electrical contact. Look up "sneaky footprints PCB" on the web.
  4. Mounting holes are for 4-40 screws and stand-offs.
  5. Peak 82% efficiency during max charge rate as measured.
  6. Less than 0.5mA current draw from input when idle, not charging.
  7. There is no D2 LED, only D1 and D3.

Parts

88
QtyValueFootprintReferences
131uCapacitors_SMD:C_1206C1, C3, C5, C7, C8, C11, C13, C15, C18, C21, C22, C24, C29
90.1uCapacitors_SMD:C_1206C2, C6, C9, C12, C14, C16, C19, C26, C30
6SSR4BMB:SMD4_SSR_CPC1002NS1, S3, S4, S5, S6, S7
5390Resistors_SMD:R_1206R6, R13, R19, R22, R25
4191kResistors_SMD:R_1206R1, R10, R21, R24
42kResistors_SMD:R_1206R8, R11, R12, R18
4MountingHoleBMB:3mm_holeMNT1, MNT2, MNT3, MNT4
310uCapacitors_SMD:C_1206C4, C20, C25
3FuseFuse_Holders_and_Fuses:Fuse_SMD1206_HandSolderingF1, F2, F3
21.33MResistors_SMD:R_1206R16, R23
215uBMB:2917C27, C28
24.7uCapacitors_SMD:C_1206C17, C23
2820Resistors_SMD:R_1206R14, R17
2ATTINYTO_SOT_Packages_SMD:SOT-23-6_HandsolderingU3, U7
2Conn_01x02BMB:Molex_Microfit3_Header_2pin_Angled_43650J3, J5
2Conn_01x05BMB:Staggered_ICSP_5x2.54mm_StraightJ2, J4
2LEDLEDs:LED_1206D1, D3
2MCP6401TO_SOT_Packages_SMD:SOT-23-5_HandSolderingU1, U8
10.22uCapacitors_SMD:C_1206C10
1158kResistors_SMD:R_1206R5
119.1kResistors_SMD:R_1206R4
1200kResistors_SMD:R_1206R15
1210kResistors_SMD:R_1206R3
122.1Resistors_SMD:R_1206R9
1470Resistors_SMD:R_1206R7
149.9kResistors_SMD:R_1206R2
15.6kResistors_SMD:R_1206R20
1680uBMB:SMD_Inductor_Shielded_6x6mmL1
174AHC1G14TO_SOT_Packages_SMD:SOT-353_SC-70-5_HandsolderingU10
174AUC1G79TO_SOT_Packages_SMD:SOT-353_SC-70-5_HandsolderingU9
1Conn_01x03BMB:Molex_Microfit3_Header_3pin_Angled_43650J1
1LT3009TO_SOT_Packages_SMD:SC-70-8_HandsolderingU6
1MCP73831TO_SOT_Packages_SMD:SOT-23-5_HandSolderingU5
1OPTOSOLOBMB:SMD4_TL241AF-SSR_0.1_12x5mmS2
1SN74LVC2G08BMB:VSSOP-8U11
1SPBW03GBMB:SPBW03GU4
1SWITCHDCDCLOPOWBMB:10-μMAX_3x3mmU2

Similar boards

  • 4 layers101.6 × 44.5 mmPowerShuffler, the printed circuit board in 3D

    PowerShuffler

    marmot-innovations/PowerShuffler1

    HV isolated DC-DC charger PCBA for balancing weak cells within a large battery stack of Li-Ion cells.

    76 partsGPL-3.0
  • 4 layers50 × 40 mmGps watch, the printed circuit board in 3D

    Gps watch

    SuperTails/gps-watch

    Code and design files for the Landhopper GPS watch

    87 partsApache-2.0
  • 2 layers40 × 60 mmJoint controller board rev d logic, the printed circuit board in 3D

    Joint controller board rev d logic

    aliahumanoid/alia-humanoid-core

    Humanoid research project (Phase 0): firmware, host software, STL files and electronics for tendon-driven joints inside real human proportions. GPLv3 software, CC BY-NC-ND hardware files.

    43 parts12GPL-3.0
  • 2 layers64.2 × 49.3 mmIdeal Diode Rev1, the printed circuit board in 3D

    Ideal Diode Rev1

    ut-ras/rm_electrical-supercap

    22 parts1
  • 2 layers173 × 114 mmMidi Merger, the printed circuit board in 3D

    Midi Merger

    mrwillem/PCBs

    174 parts
  • 6 layers64 × 90 mmUrti mainboard, the printed circuit board in 3D

    Urti mainboard

    greatscottgadgets/urti-mainboard

    Mainboard of URTI, the Universal Radio Test Instrument

    468 parts29CERN-OHL-P-2.0
  • 2 layers68.3 × 57.7 mmSdmux4, the printed circuit board in 3D

    Sdmux4

    hnz1102/sdcdmux-emmc

    SD CARD and eMMC Device Multiplexer with Infrared Remote Controller

    115 parts16MIT
  • 2 layers50 × 132 mmSd mux, the printed circuit board in 3D

    Sd mux

    tmarkettos/sd-mux

    SD card multiplexer, for automated embedded development

    55 parts7Apache-2.0

Questions

How big is the PowerShuffler2 PCB?

It measures 88.9 × 44.5 mm and has 4 copper layers, 1.6 mm thick.

What parts does the PowerShuffler2 use?

88 parts, built around the SPBW03G-12, MCP6401-E/LT, 74AHC1G14GV and MCP73831. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PowerShuffler2 KiCad files?

From the marmot-innovations/PowerShuffler2 repository on GitHub, at the commit this page was made from: the board is PowerShuffler2PCB/PowerShuffler2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the PowerShuffler2 design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).