Skip to the content
2 layers122.1 × 97.9 mmESP32-S3 ETH, the printed circuit board in 3D

pcb for esp32-s3 eth on kicad

Size
122.1 × 97.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
20
Nets
37
Pads
134
Tracks, vias
260, 47
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
20 May 2026
Updated
25 May 2026

Overview

ESP32-S3 ETH is an open-source printed circuit board by marlonpr, from the marlonpr/ESP32-S3_ETH_PCB repository on GitHub. It is a 2-layer board of 122.1 × 97.9 mm with 20 parts on 37 nets, routed with 260 tracks and 47 vias.

It is built around the SSW-104-01-F-S and SSW-108-02-G-D. Its parts include 8 connectors, 7 resistors and 1 IC. It belongs with the ESP32 boards of this library.

Main components

2

Parts

20
QtyValueFootprintReferences
43.2mm_M3_THMounting Hole:3.2mm_M3_THH1, H2, H3, H4
31kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2, R3
3220Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR4, R5, R6
2SSW-120-01-X-SSSW-120-01-X-S:SAMTEC_SSW-120-01-X-SJ7, J8
2Screw_Terminal_01x03TerminalBlock:TerminalBlock_Altech_AK300-3_P5.00mmJ5, J6
14.7kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR7
1ESP32-S3-ETHESP32-S3-ETH:MODULE_ESP32-S3-ETHU1
1SSW-104-01-F-SSSW-104-01-F-S:SAMTEC_SSW-104-01-F-S-RTCJ3
1SSW-108-02-G-DSSW-108-02-G-D:SAMTEC_SSW-108-02-G-DJ4
1Screw_Terminal_01x02TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mmJ1
1Screw_Terminal_01x04TerminalBlock:TerminalBlock_Altech_AK300-4_P5.00mmJ2

Similar boards

  • 2 layers127.2 × 90 mmPanel controller, the printed circuit board in 3D

    Panel controller

    marlonpr/pcb_clock_v1

    pcb clock v1

    17 parts
  • 2 layers66.9 × 74.5 mmDeskHop Rev1, the printed circuit board in 3D

    DeskHop Rev1

    hrvach/deskhop

    Fast Desktop Switching Device

    20 parts7.9kGPL-3.0
  • 2 layers86.4 × 64.8 mmSlot machine, the printed circuit board in 3D

    Slot machine

    google/google-ctf

    Google CTF

    20 parts5.1kApache-2.0
  • 2 layers36.2 × 26.8 mmEsp32 minimal, the printed circuit board in 3D

    Esp32 minimal

    atopile/atopile

    Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️

    20 parts4kMIT
  • 2 layers108.1 × 393.8 mmSweep compact ble, the printed circuit board in 3D

    Sweep compact ble

    davidphilipbarr/Sweep

    Sweep - a small promicro based keyboard inspired by the Ferris.

    20 parts2.1k
  • 2 layers26 × 15.9 mmTPS54340 Buck Regulator, the printed circuit board in 3D

    TPS54340 Buck Regulator

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    20 parts1.2k
  • 2 layers67.6 × 30.5 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    20 parts1kGPL-3.0
  • 2 layers44.3 × 28.7 mmLin bus adapter esp32, the printed circuit board in 3D

    Lin bus adapter esp32

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    20 parts915

Questions

How big is the ESP32-S3 ETH PCB?

It measures 122.1 × 97.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ESP32-S3 ETH use?

20 parts, built around the SSW-104-01-F-S and SSW-108-02-G-D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ESP32-S3 ETH KiCad files?

From the marlonpr/ESP32-S3_ETH_PCB repository on GitHub, at the commit this page was made from: the board is ESP32-S3_ETH.kicad_pcb and its schematic ESP32-S3_ETH.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ESP32-S3 ETH design in my own project?

Its repository states no licence, so its author keeps all rights: ask marlonpr before reusing the design.