Skip to the content
2 layersIRseekerv2, the printed circuit board in 3D

Replacement sensor for IRseeker from HiTechnic

Copper layers
2
Thickness
1.6 mm
Parts
53
Nets
59
Pads
205
Tracks, vias
537, 91
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
13 Aug 2023
Updated
24 Mar 2024

Overview

IRseekerv2 is an open-source printed circuit board by markosko, from the markosko/IRseeker-kicad repository on GitHub. It is a 2-layer board with 53 parts on 59 nets, routed with 537 tracks and 91 vias.

It is built around the TSSP4038, HEF4082BT and AMS1117-3.3. Its parts include 16 ICs, 12 connectors, 11 capacitors, 6 resistors and 2 diodes. It belongs with the sensors and measurement boards and the STM32 boards of this library.

Main components

3

README

README.md

View this project on CADLAB.io.

IRseeker-kicad

Used as replacement for IRseeker sensor and similar for Lightweight / Entry leagues with infra ball in Robocup Junior, based on STM32G431CBU6 and TSSP4038

With communication over I2C or Serial protocol.

Serial over TX_3V / RX_3V pins is only 3.3V tolerant!

Serial over TX3_5V / RX3_5V pins is 5V tolerant.

I2C is 5V tolerant.

Logic AND gates HEF4082BT at U2 and U4 are optional for chip at PC6 pin input to detect if any TSSP4038 detects ball.

AMS1117 part is not needed in case of powering from 3.3V source

Programmed by external STLINK or similar over SWD pins at J13 header.

Basic serial code

Basic I2C code

3D view from KiCad

Top side

Bottom side

Assembled images

Top side assembled

Bottom side assembled

Sponsored by

A big thanks to PCBway for sponsoring my project! Their rapid-prototyping services provided top-quality PCB boards, streamlining the entire process from order to delivery. I was particularly impressed by their outstanding customer support, which was willing to change few details.

Parts

53
QtyValueFootprintReferences
12TSSP4038Vishay:Vishay_MINICAST-3PinU5, U6, U7, U8, U9, U10, U11, U12, U13, U14, U15, U16
6100nFCapacitor_SMD:C_0603_1608MetricC3, C4, C7, C8, C9, C11
5Conn_01x02_PinConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ14, J20, J26, J27, J28
4GMountingHole:MountingHole_3.2mm_M3_PadJ16, J17, J18, J19
210kRResistor_SMD:R_0603_1608MetricR2, R3
210pFCapacitor_SMD:C_0603_1608MetricC1, C2
210uFCapacitor_SMD:C_0603_1608MetricC5, C6
2330RResistor_SMD:R_0603_1608MetricR1, R6
282kRResistor_SMD:R_0603_1608MetricR4, R5
2Conn_01x01_PinConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ1, J2
2HEF4082BTPackage_SO:SO-14_3.9x8.65mm_P1.27mmU2, U4
2LEDLED_SMD:LED_0603_1608MetricD1, D2
2SW_PushButton_Switch_THT:SW_PUSH_6mmSW1, SW2
2SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mmJP1, JP2
14.7uFCapacitor_SMD:C_0603_1608MetricC10
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U17
1Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ13
1CrystalCrystal:Crystal_SMD_HC49-SDY1
1LOGOLOGOG***
1STM32G431CBUxPackage_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mmU3

Similar boards

  • 2 layersTotal pcb, the printed circuit board in 3D

    Total pcb

    mendelcollege-robotics/robotica

    The repository for the code of the soccer robot of Mendelcollege

    143 parts1EUPL-1.2
  • 2 layers56.4 × 56.4 mmDoor bug, the printed circuit board in 3D

    Door bug

    DanElbert/esp_bug

    ESP8266 based sensors

    13 partsMIT
  • 2 layers68.3 × 57.8 mmSdcdmuxemmc, the printed circuit board in 3D

    Sdcdmuxemmc

    hnz1102/sdcdmux-emmc

    SD CARD and eMMC Device Multiplexer with Infrared Remote Controller

    107 parts16MIT
  • 4 layers86.1 × 30.1 mmMain-20240325, the printed circuit board in 3D

    Main-20240325

    penguin92-prg/2024-TOINIOT2

    TOINIOT 2024年度 メインリポジトリ

    96 parts2
  • 2 layers76.2 × 50.8 mmTarget Slave, the printed circuit board in 3D

    Target Slave

    AlexWheelock/Laser-Arcade-Project

    All documentation of the Laser Arcade Project

    44 parts1
  • 2 layersIR ring v05, the printed circuit board in 3D

    IR ring v05

    bohlebots/soccer

    open source files of the teams www.bohlebots.de

    29 parts1
  • 2 layers150 × 150 mmBall 2026 v1, the printed circuit board in 3D

    Ball 2026 v1

    Gamu2124/RoboCupJunior2026-RobotDatas

    Complete data for the robot that won the Japan and World championships / 日本大会優勝 & 世界大会優勝したロボットの全データ

    65 parts1
  • 2 layers29 × 42 mmBallcatch sensor, the printed circuit board in 3D

    Ballcatch sensor

    akihiro-kataoka/KiCad_Circuit-Board_data

    4 parts

Questions

What parts does the IRseekerv2 use?

53 parts, built around the TSSP4038, HEF4082BT and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the IRseekerv2 KiCad files?

From the markosko/IRseeker-kicad repository on GitHub, at the commit this page was made from: the board is IRseekerv2.kicad_pcb and its schematic IRseekerv2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the IRseekerv2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask markosko before reusing the design.