
Ice4pi
lightside-instruments/gpib4pi
The gpib4pi project is open hardware design of a Raspbery Pi extension board with GPIB interface using only GPIOs.

PCB for a Raspberry Pi GPIB board.
My raspi gpib is an open-source printed circuit board by markmerz, from the markmerz/rpi-gpib-pcb repository on GitHub. It is a 2-layer board of 99.9 × 99.9 mm with 67 parts on 50 nets, routed with 755 tracks and 96 vias.
It is built around the SN75160BN and SN75161BN. Its parts include 54 resistors, 3 capacitors, 2 ICs, 2 diodes and 2 connectors.
PCB for a Raspberry Pi GPIB board.
Different PCB layout for a electronomikon's Raspberry Pi GPIB shield design at https://github.com/elektronomikon/raspi_gpib_shield/.
This board is 100x100mm and connects to the RPI with 2x20 ribbon cable. Designed to fit into particular milled aluminum box I had lying around. RPI has VXI11 server which exposes GPIB to the network.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 3.3k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R2, R3, R4, R5, R6, R7, R37, R38, R39, R40, R41, R42, R43, R44, R53, R54 +2 |
| 16 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R18, R19, R20, R21, R22, R23, R24, R25, R45, R46, R47, R48, R49, R50, R51, R52 |
| 16 | 6.8k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R10, R11, R12, R13, R14, R15, R16, R17, R29, R30, R31, R32, R33, R34, R35, R36 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 15k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R26, R27, R28 |
| 2 | 220n | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C2, C3 |
| 1 | 33 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1 |
| 1 | 47n | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C1 |
| 1 | ACT | LED_THT:LED_D3.0mm | D2 |
| 1 | Centronics_24M | KiCad-Centronics24M:Centronics_24M | J1 |
| 1 | PWR | LED_THT:LED_D3.0mm | D1 |
| 1 | Raspberry_Pi_4 | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J2 |
| 1 | SN75160BN | Package_DIP:DIP-20_W7.62mm | U1 |
| 1 | SN75161BN | Package_DIP:DIP-20_W7.62mm | IC1 |

lightside-instruments/gpib4pi
The gpib4pi project is open hardware design of a Raspbery Pi extension board with GPIB interface using only GPIOs.


VE7PMC/AVR488
USB to IEEE-488 interface based on the ATmega168/328 microcontroller




joseluu/MCP-AR-488-ESP32
The idea is to have AI help me build electronics. AI needs eyes, the eyes are the oscilloscope which is used through an MCP interface.

OpenhimerLab/CareLite-GPIB
CareLite is an open-source, tiny, small USB-GPIB adaptor based on STM32 with temperature sensors.
It measures 99.9 × 99.9 mm and has 2 copper layers, 1.6 mm thick.
67 parts, built around the SN75160BN and SN75161BN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the markmerz/rpi-gpib-pcb repository on GitHub, at the commit this page was made from: the board is my_raspi_gpib/my_raspi_gpib.kicad_pcb and its schematic my_raspi_gpib/my_raspi_gpib.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask markmerz before reusing the design.