Skip to the content
2 layers79.3 × 47.9 mmUSB Saturn obdev, the printed circuit board in 3D

USB Saturn obdev

mark-dawn/YASU2

Yet Another Saturn to USB, and adapter to use the venerable Saturn controller on a modern PC

Size
79.3 × 47.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
22
Pads
86
Tracks, vias
152, 11
Pours
4
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
27 Jun 2018
Updated
30 Mar 2026

Overview

USB Saturn obdev is an open-source printed circuit board by mark-dawn, from the mark-dawn/YASU repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 79.3 × 47.9 mm with 21 parts on 22 nets, routed with 152 tracks and 11 vias.

It is built around the ATMEGA328-PU. Its parts include 6 resistors, 5 capacitors, 4 connectors, 2 diodes and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

YASU

What's this?

Yet Another Saturn to USB is a small pet project with 3 aims:

  1. Connect a couple of Saturn controllers to my PC for retrogaming
  2. Learn how the USB protocol works
  3. Learn how to make a PCB and other hardware shenanigans

While I do not expect it to blow anyone's mind, I believe that the code and board turned out quite good and are usable both in practice and for learning purposes.

Hardware support

For now only the standard Saturn controller is supported, and has been tested with Japanese HSS-0101 controllers.

However the code is structured so it should be easy to add support for other Saturn peripherals; for sure, support for the 3D Controller is planned since I own one of those.

Support for the Saturn Mouse might be harder since the board should reconfigure itself as a pointer HID device at enumeration time.

Note about contacts

The connection between board and the Saturn plug is handled quite rudimentary at the moment. Flat naked metal pads on tabs that fit inside the cavity of the plug are present, but cannot make direct contact with the pads in the plug.

For now the "intended" way is to solder extension metal pads to make contact, but it is quite hard to solder those manually and the connection can act shaky.

In the future I plan to swap those out for flat pogo pins, or if no suitable part exists, use a proper 3D printed receptacle.

Credits

This project would have not been as easy as it was without various resources from the Internets.

TODO

  • Fix contact between board and Saturn Plug
  • Add support for 3D pad
  • Extend credits list, expecially for HID configuration examples
  • Look into how licenses work since v-usb is under the GPL-2, and go around and slap it in the files that necessitate it
  • Add better documentation to Saturn.c to clarify which bits are getting extracted without having to look at the header file

License

All the repository is licensed under the GPL-3. See LICENSE for more info.

text
Copyright (C) 2022  Marica Albanesi


This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

Parts

21
QtyValueFootprintReferences
322kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R5, R6
210nCapacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mmC3, C4
210uCapacitor_THT:CP_Radial_D4.0mm_P2.00mmC1, C5
23v6Diode_THT:D_T-1_P5.08mm_HorizontalD1, D2
248oResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2, R3
2CONN_01X09conn_usr:Saturn_f_standaloneJ2, J3
10u1Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mmC2
112MCrystal:Crystal_HC49-4H_VerticalX1
11k5Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR4
1ATMEGA328-PUPackage_DIP:DIP-28_W7.62mmU1
1AVR-ISP-6Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalCON1
1G***logos:logo_MA2logo_MA2
1G***logos:osh_silksvg2mod
1USB_BConnector_USB:USB_B_OST_USB-B1HSxx_HorizontalJ1

More from mark-dawn/YASU

1
  • 2 layers72.6 × 47.2 mmUSB Saturn obdev flat USB, the printed circuit board in 3D

    USB Saturn obdev flat USB

    mark-dawn/YASU

    Yet Another Saturn to USB, and adapter to use the venerable Saturn controller on a modern PC

    19 parts2GPL-3.0

Similar boards

  • 2 layers104.9 × 75.2 mmHandipi kb, the printed circuit board in 3D

    Handipi kb

    brickbots/HandiPi

    Handheld RPI4 based computer with keyboard and display

    95 parts814MIT
  • 2 layers228 × 98 mmPlaid, the printed circuit board in 3D

    Plaid

    hsgw/plaid

    12x4 ortholinear usb keyboard made by Through Hole components ONLY.

    139 parts779MIT
  • 2 layers94.6 × 46.1 mmHeaterMeterPI, the printed circuit board in 3D

    HeaterMeterPI

    CapnBry/HeaterMeter

    HeaterMeter and LinkMeter Arduino BBQ Controller

    66 parts557MIT
  • 2 layers50 × 50 mmAvrcraft poed, the printed circuit board in 3D

    Avrcraft poed

    cnlohr/avrcraft

    Minecraft server optimized for 8-bit devices.

    58 parts471
  • 2 layers284.7 × 94.2 mmLumberjack, the printed circuit board in 3D

    Lumberjack

    peej/lumberjack-keyboard

    5x12 ortholinear through-hole component keyboard PCB for standard 60% cases

    165 parts403MIT
  • 2 layers132.1 × 45.7 mmIPoS, the printed circuit board in 3D

    IPoS

    peterheinrich/InternetOverSpaghetti

    Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

    42 parts342
  • 2 layers63.3 × 57.2 mmRam Tester, the printed circuit board in 3D

    Ram Tester

    tops4u/Ram-Tester

    Ram Tester for vintage CBM Computer RAM Chips

    42 parts118
  • 2 layers285 × 117 mmTartan, the printed circuit board in 3D

    Tartan

    hsgw/tartan

    60% keyboard made by through-hole parts only

    171 parts98

Questions

How big is the USB Saturn obdev PCB?

It measures 79.3 × 47.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the USB Saturn obdev use?

21 parts, built around the ATMEGA328-PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the USB Saturn obdev KiCad files?

From the mark-dawn/YASU repository on GitHub, at the commit this page was made from: the board is hardware/USB_Saturn_obdev.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the USB Saturn obdev design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).