
ESP32 Sprinkle Timer
rgodin974/ESP32_sprinkler_timer
Coded on PlateformIO and VS Code. Project based on RitonDuino : https://riton-duino.blogspot.com/2023/08/esp32-micro-irrigation-connectee-partie.html

Diferrent Arduino projects made 4 fun
TimeRelay is an open-source printed circuit board by marians20, from the marians20/arduino_projects repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 99.1 × 73.7 mm with 11 parts on 38 nets, routed with 97 tracks and 9 vias.
It is built around the HLK-10M24. Its parts include 6 connectors and 2 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Diferrent Arduino projects made 4 fun
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 10k | Potentiometer_THT:Potentiometer_Alps_RK09L_Single_Vertical | Time1 |
| 1 | 230V Input | Connector_Wire:SolderWire-1.5sqmm_1x02_P7.8mm_D1.7mm_OD3.9mm | J1 |
| 1 | 230V Output | Connector_Wire:SolderWire-1.5sqmm_1x02_P7.8mm_D1.7mm_OD3.9mm | J2 |
| 1 | 5V Relay Module | Relay_THT:Relay_SPDT_Finder_32.21-x000 | K1 |
| 1 | Arduino_Nano_Every | Module:Arduino_Nano | A1 |
| 1 | Conn_01x02_Socket | Connector_Wire:SolderWire-1.5sqmm_1x02_P7.8mm_D1.7mm_OD3.9mm | J4 |
| 1 | HLK-10M24 | Converter_ACDC:Converter_ACDC_HiLink_HLK-10Mxx | PS1 |
| 1 | Relay | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J13 |
| 1 | Relay NO contact | Connector_Wire:SolderWire-1.5sqmm_1x02_P7.8mm_D1.7mm_OD3.9mm | J3 |
| 1 | Relay command | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J10 |
| 1 | Start | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx83-2LFS | SW1 |

rgodin974/ESP32_sprinkler_timer
Coded on PlateformIO and VS Code. Project based on RitonDuino : https://riton-duino.blogspot.com/2023/08/esp32-micro-irrigation-connectee-partie.html

duyhohoang/duyhohoang.github.io
Hoàng Duy — PCB Design, Embedded Systems and IoT portfolio

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

It measures 99.1 × 73.7 mm and has 2 copper layers, 1.6 mm thick.
11 parts, built around the HLK-10M24. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the marians20/arduino_projects repository on GitHub, at the commit this page was made from: the board is start_wait_stop/kiCad/TimeRelay/TimeRelay.kicad_pcb and its schematic start_wait_stop/kiCad/TimeRelay/TimeRelay.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).