2 layers55.4 × 62.4 mm
DelSolClock Rear
Marcus10110/DelSolClock
This is a project to replace the clock in my car with an ESP32 and a small display.
15 parts3
2 layers63.8 × 70.9 mm
DelSolClock
Marcus10110/DelSolClock3This is a project to replace the clock in my car with an ESP32 and a small display.
- Size
- 63.8 × 70.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 94
- Nets
- 84
- Pads
- 363
- Tracks, vias
- 809, 106
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 28 Aug 2021
- Updated
- 3 Jul 2026
Overview
DelSolClock is an open-source printed circuit board by Marcus10110, from the Marcus10110/DelSolClock repository on GitHub. It is a 2-layer board of 63.8 × 70.9 mm with 94 parts on 84 nets, routed with 809 tracks and 106 vias.
It is built around the ESP32-WROOM-32D, LSM6DS3 and SAM-M8Q-0, with the SY6280AAC, TLV1117-33DCY and ZMM3V6-M among its other parts. Its parts include 33 resistors, 11 connectors, 10 capacitors, 10 diodes and 6 ICs. It belongs with the ESP32 boards of this library.
Main components
12
ESP32-WROOM-32D
-- WiFi Modules ROHSEspressif SystemsWiFi Modules
LSM6DS3
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 8KB Accelerometer Gyroscope SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps LGA-14(2.5x3) Accelerometers ROHSSTMicroelectronicsAccelerometers
SAM-M8Q-0
SMD-20P,15x15mmUncategorisedu-blox
SY6280AAC
SOT-23-5-40℃~+125℃ 1 2.4V~5.5V 80mΩ Active High High Side Switch Overcurrent Protection(OCP)、Over Temperature Protection SOT-23-5 Power Distribution Switches ROHS矽力杰silergyPower Distribution SwitchesTLV1117-33DCY
UncategorisedTexas Instruments
ZMM3V6-M
LL-341 Independent 2uA@1V 3.4V~3.8V 3.6V 500mW 600Ω 85Ω LL-34 Zener Diodes ROHSSTMicroelectronicsZener Diodes
MMBT2222A
SOT-23-55℃~+150℃ 1 NPN 100 100nA 1V 300MHz 300mW 40V 600mA 6V NPN Standalone SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)MMBT2907A
SOT-23-55℃~+150℃ 1 PNP 100 100nA 200MHz 250mW 400mV 5V 600mA 60V PNP SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)SSL-LX4673ID-LA20
插件,6.2x3.7mm-40℃~+85℃ 100° 12mcd 2V~2.5V 6.35nm Frosted Red Lens Red 插件,6.2x3.7mm LED Indication - Discrete ROHSLumexLED Indication - DiscreteCMI-9650C-120
插件,D=9.6mm-20℃~+70℃ 10V~13V 2.73kHz 5.5mm 85dB 9.6mm Active Buzzer (Built-in Driving Circuit) Electromagnetic 插件,D=9.6mm Buzzers ROHSCUIBuzzers
SS210
SMA(DO-214AC)-55℃~+150℃ 1 Independent 100V 2A 500uA@100V 850mV@2A SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
TS-1187A-B-A-B
SMD-4P,5.1x5.1mm-30℃~+85℃ 1.5mm 1.6N 100,000 cycles 12V 5.1mm 5.1mm 50mA Gold No Round Button SPST Surface Mount,Vertical Without Bracket SMD-4P,5.1x5.1mm Tactile Switches ROHSXKB ConnectionTactile Switches
README
readme.mdDel Sol Clock
This is a project to replace the clock in my car with an ESP32 and a small display.
The replacement clock screen will display time, the currently playing music, and iOS notifications.
Bluetooth low energy is used to communicate with a phone. Note, some services should support any BLE phone, for example the current time service. However the Apple Media Service and the notification service only support iOS.
Features
Apple Media Service
This displays the current playback information from the iPhone. It doesn't currently support playback controls (e.g. next/previous track).
Special thanks to the following examples. As far as I can tell, this hasn't been implemented using the Arduino ESP32 board library before.
- James Hudson's Apple Notification Center Service This example finally showed how to solicit services using the Arduino ESP32 library, which is not built-in.
- John Park's Adafruit Guide to the Apple Media Service Display This was the first working example I could find. Written in CircutPython.
- Moddable's Apple Media Service example This was another good example, written in javascript.
Current Time Service
This gets the current time.
Current Time Service Documentation
Note, the documentation is split over several PDFs. See CurrentTimeService.cpp for more documentation links.
Parts
94| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | TestPoint | TestPoint:TestPoint_Keystone_5000-5004_Miniature | TP3V3, TP12V1, TPBATT1, TPBUZ1, TPIGN1, TPLAMP1, TPROOF1, TPRX1, TPSCL1, TPSDA1, TPTRNK1, TPTX1, TPWIN1 |
| 11 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R4, R7, R10, R23, R25, R27, R29, R31, R33 |
| 8 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J3, J4, J5, J7, J8, J9, J10 |
| 6 | 34K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R22, R24, R26, R28, R30, R32 |
| 6 | ZMM3V6-M | Diode_SMD:D_MiniMELF | D5, D6, D7, D8, D9, D10 |
| 5 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15, R16, R18, R20, R21 |
| 4 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R9, R13, R19 |
| 3 | 100K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R14, R17 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C8, C9 |
| 3 | MMBT2222A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 3 | MMBT2907A | Package_TO_SOT_SMD:SOT-23 | Q4, Q5, Q6 |
| 2 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C10 |
| 2 | 15p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7 |
| 2 | 2K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R8 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | SSL-LX4673ID-LA20 | DelSolLib:LED_Rectangular_W3.65mm_L6.15mm | D2, D3 |
| 1 | 100u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5 |
| 1 | 180 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 3.4K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
| 1 | Adafruit_1.14in_TFT | DelSolLib:Adafruit_1.14in_TFT | U4 |
| 1 | CLOCK_BUTTONS | DelSolLib:Switch_DelSol | J6 |
| 1 | CMI-9650C-120 | DelSolLib:Buzzer_CUI-CMI-9650C-120 | BZ1 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | Conn_01x08_Male | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J11 |
| 1 | DT-26 32.768KHz | Crystal:Crystal_DS26_D2.0mm_L6.0mm_Horizontal_1EP_style1 | Y1 |
| 1 | ESP32-WROOM-32D | RF_Module:ESP32-WROOM-32 | U2 |
| 1 | LSM6DS3 | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U6 |
| 1 | SAM-M8Q | RF_GPS:ublox_SAM-M8Q | U5 |
| 1 | SS210 | Diode_SMD:D_SMA_Handsoldering | D1 |
| 1 | SY6280A | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | TLV1117-33 | Package_TO_SOT_SMD:SOT-223 | U1 |
| 1 | TS-1187A-B-A-B | Button_Switch_SMD:SW_SPST_SKQG_WithoutStem | SW1 |
| 1 | WP132XGD | LED_THT:LED_D3.0mm | D4 |
Questions
How big is the DelSolClock PCB?
It measures 63.8 × 70.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DelSolClock use?
94 parts, built around the ESP32-WROOM-32D, LSM6DS3, SAM-M8Q-0 and SY6280AAC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DelSolClock KiCad files?
From the Marcus10110/DelSolClock repository on GitHub, at the commit this page was made from: the board is hardware/DelSolClock/DelSolClock.kicad_pcb and its schematic hardware/DelSolClock-Rear/DelSolClock-Rear/DelSolClock-Rear.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DelSolClock design in my own project?
Its repository states no licence, so its author keeps all rights: ask Marcus10110 before reusing the design.
More from Marcus10110/DelSolClock
1Similar boards
- 2 layers25.4 × 57.2 mm
OpenTherm Click
michpro/mikroBUS
Collection of add-on boards in mikroBUS™ standard
58 parts5CERN-OHL-P-2.0 - 2 layers68.6 × 53.3 mm
Arduino OpenTherm shield
anway0404/Arduino_OpenTherm_shield
Arduino hardware shield to send and receive data from Opentherm devices
54 parts3CERN-OHL-P-2.0 - 2 layers188.4 × 185 mm
- 2 layers68.6 × 53.3 mm
Arduino OpenTherm shield
michpro/Arduino_OpenTherm_shield
Arduino hardware shield to send and receive data from OpenTherm devices
55 parts1CERN-OHL-P-2.0 - 2 layers38.5 × 49 mm
KISRAK M1
Nec0ti/KISRAK-M1
A high-performance, logic-level H-Bridge motor driver. Features discrete MOSFET design with passive hardware dead-time protection and 3.3V logic compatibility.
35 parts1AGPL-3.0 - 2 layers74.4 × 30.8 mm
Sk003-output
mirdej/synkie
The Synkie is a modular open source analog video processor, developed by Michael Egger, Max Egger and Flo Kaufmann
83 parts47 - 2 layers100 × 100 mm
Kicad JE SteinerVCF
promesoft/KicadJE-SteinerVCF
Adoption of the original 1974 steiner VCF THT+SMD - And ICL8083 VCO RevB
154 parts7 - 2 layers90 × 54 mm
RoomThermostat
henkjannl/RoomThermostat
Opentherm room thermostat that can be controlled through Telegram, but also locally
66 parts1MIT