

TP-0010U001
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 49
- Pads
- 99
- Tracks, vias
- 36, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 9 Sep 2025
- Updated
- 17 Sep 2025
Overview
TP-0010U001 is an open-source printed circuit board by Marck-G, from the Marck-G/CAN-Update repository on GitHub. It is a 2-layer board with 15 parts on 49 nets, routed with 36 tracks and 0 vias.
It is built around the ATMEGA328P-MU and TJA1051T. Its parts include 7 capacitors, 4 ICs, 2 resistors and 2 crystals. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATMEGA328P-MU
HVQFN-32(5x5)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH VQFN-32(5x5) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontroller Units (MCUs/MPUs/SOCs)TJA1051T
SOIC-8-40℃~+150℃ 2.5mA 4.5V~5.5V 5Mbps 70mA CAN Transceiver SOIC-8 CAN Transceivers ROHSNXP SemiconductorsCAN Transceivers
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 22pF | Capacitor_THT:C_Radial_D4.0mm_H5.0mm_P1.50mm | C1, C4, C6, C7 |
| 3 | 0,1 uF | Capacitor_THT:C_Radial_D4.0mm_H5.0mm_P1.50mm | C2, C3, C5 |
| 1 | 16MHz | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | 4,7 K | Resistor_THT:R_Box_L8.4mm_W2.5mm_P5.08mm | R2 |
| 1 | 4,7K | Resistor_THT:R_Box_L8.4mm_W2.5mm_P5.08mm | R1 |
| 1 | 8 MHz | Crystal:Crystal_HC49-U_Vertical | Y2 |
| 1 | ATmega328P-M | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm | U4 |
| 1 | MCP2515-xSO | Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm | U2 |
| 1 | TJA1051T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | TMP117xxDRV | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U1 |
Similar boards
- 2 layers150 × 50 mm

- 4 layers105 × 55 mm

MotorKit
zhbi98/ODriveX
【无刷电机FOC驱动器】双通道 FOC 无刷电机驱动套件,最高电压 60V 单通道电流可达 100A,可以驱动 1.2kW 以内 BLDC 或 PMSM(有中文注释)。
184 parts22MIT - 2 layers65 × 40 mm

- 4 layers42 × 42 mm

Motor42
zhbi98/Motor42
【小型 42mm 伺服电机】支持 RS485 和 CAN 协议的闭环功能的步进电机,支持功率和通信级联(节点串联连接),适用于 3D 打印机,舵机,小型机械臂
89 parts8MIT - 2 layers70.1 × 45.8 mm

- 2 layers54.6 × 86.4 mm

- 2 layers114 × 95 mm

- 2 layers66 × 80.7 mm

JO1 PCB
CEJ2-Robotics/JO1_Electronics
This repository contains the PCB layout for a shield-style board designed to interface with the NUCLEO-H745ZI-Q development board.
34 parts2
Questions
What parts does the TP-0010U001 use?
15 parts, built around the ATMEGA328P-MU and TJA1051T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TP-0010U001 KiCad files?
From the Marck-G/CAN-Update repository on GitHub, at the commit this page was made from: the board is experiments/Electric/TP-0010U001/TP-0010U001.kicad_pcb and its schematic experiments/Electric/TP-0010U001/CAN_BUS/CAN_BUS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TP-0010U001 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Marck-G before reusing the design.