2 layers429.6 × 540.7 mm
Keyboard
joshajohnson/louise
A project between Josh and RiotPunch to build a 75% alice keyboard with a southpaw numpad.
327 parts5
2 layers278.6 × 86.7 mm
Annelise
Marbelymarble/Annelise5A PrimeE-Style gasket mounted 3d printable keyboard
- Size
- 278.6 × 86.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 93
- Nets
- 92
- Pads
- 404
- Tracks, vias
- 786, 40
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 16 Mar 2021
- Updated
- 8 Jun 2021
Overview
Annelise is an open-source printed circuit board by Marbelymarble, from the Marbelymarble/Annelise repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 278.6 × 86.7 mm with 93 parts on 92 nets, routed with 786 tracks and 40 vias.
It is built around the XC6206P332MR, BAT54C and DTC123JE. Its parts include 48 switches, 24 diodes, 9 capacitors, 3 resistors and 2 ICs. It belongs with the STM32 boards of this library.
Main components
3
XC6206P332MR
SOT-23-40℃~+85℃@(Ta) 1 1uA 200mA 3.3V 6V Fixed Over Current Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsBAT54C
SOT-231 Pair Common Cathode 200mA 2uA@25V 30V 600mA 800mV@100mA SOT-23 Schottky Diodes ROHSNexperiaSchottky Diodes
DTC123JE
SOT-523-55℃~+150℃ 1 NPN (Pre-Biased) 1.1V 100mA 150mW 2.2kΩ 250MHz 26 300mV 300mV 500mV@100uA,5V 50V 80 NPN SOT-523 Digital Transistors ROHSHXY MOSFETDigital Transistors
README
README.mdAnnelise
A PrimeE-Style gasket mounted 3d printable keyboard
!!Warning: Will not fit original PrimeE PCB!!
I have so far only printed one case, still waiting for plate. As this is basically an untested keyboard at this point, i have only released the f3z archive file for now. Feel free to tinker around, also, enable "component colour cycling", makes the timeline and whole project much nicer to work with.
More progess to this project will hopefully follow shortly.
Parts
93| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | SW_Push_45deg | mxswitches:SW_MX_1u | SW1, SW2, SW10, SW11, SW12, SW13, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW24 +20 |
| 24 | BAT54C | Package_TO_SOT_SMD:SOT-23 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +8 |
| 8 | SW_Push_45deg | mxswitches:SW_MX_1.25u | SW14, SW38, SW39, SW40, SW41, SW44, SW45, SW46 |
| 5 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5, C6, C7 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C8, C9 |
| 2 | SW_Push_45deg | mxswitches:SW_MX_1.75u | SW25, SW26 |
| 1 | 1.5k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 33k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | Conn_01x03_Female | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | SWD |
| 1 | Conn_01x04_Female | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J1 |
| 1 | DTC123J | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Fuse_Small | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | LOGO | adela:exorcism | G*** |
| 1 | Resonator_Small | Crystal:Resonator_SMD_muRata_CSTxExxV-3Pin_3.0x1.1mm | Y1 |
| 1 | STM32F103CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | SW_Push | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | BOOT |
| 1 | SpaceLeft | mxswitches:STAB_MX_2u | S1 |
| 1 | SpaceRight | mxswitches:STAB_MX_2.25u | S2 |
| 1 | XC6206P332MR | Package_TO_SOT_SMD:SOT-23 | U3 |
Questions
How big is the Annelise PCB?
It measures 278.6 × 86.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Annelise use?
93 parts, built around the XC6206P332MR, BAT54C and DTC123JE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Annelise KiCad files?
From the Marbelymarble/Annelise repository on GitHub, at the commit this page was made from: the board is PCB/Annelise/Annelise.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Annelise design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers389.5 × 155.3 mm
- 4 layers246.5 × 95 mm
Viaggio
dataehora/beatconfused
A small web studio of fast, elegant, install-free music tools. Every tool is plain HTML, CSS and vanilla JavaScript with the Web Audio API — no build step, no dependencies, no accounts, works offline after first load.
215 parts1 - 2 layers393.5 × 153.7 mm
- 2 layers325.5 × 240.1 mm
- 2 layers390 × 120.2 mm
- 2 layers89 × 124 mm
Hub20
joshajohnson/Hub20
Hub20 is a numpad with a bunch of features you never knew you needed.
183 parts68 - 2 layers283 × 94.2 mm
Tsuki
AcheronProject/Tsuki
60% keyboard PCB featuring a wide array of layouts powered by STM32F072
387 parts35