2 layers78 × 130 mm
Lofence
kiu/lofence
LoFence is a LoRaWAN capable IoT electric fence monitoring system running on the The Things Network.
65 parts142MIT
2 layers80.3 × 100 mm
SubSequence
marangisto/SubSequence2Modular Sequencer Sub-Module
- Size
- 80.3 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 46
- Pads
- 177
- Tracks, vias
- 637, 50
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Aug 2018
- Updated
- 5 May 2019
Overview
SubSequence is an open-source printed circuit board by marangisto, from the marangisto/SubSequence repository on GitHub, published under the MIT licence. It is a 2-layer board of 80.3 × 100 mm with 52 parts on 46 nets, routed with 637 tracks and 50 vias.
It is built around the ATMEGA328PB-AU. Its parts include 16 diodes, 11 resistors, 9 switches, 4 capacitors and 3 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdSubSequence
Modular Sequencer Sub-Module
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100k | Local:AlpsRK09K | RV1, RV2, RV3, RV4, RV5, RV6, RV7, RV8 |
| 8 | 1N4148 | Diode_SMD:D_SOD-123F | D9, D10, D11, D12, D13, D14, D15, D16 |
| 8 | 330 | Resistor_SMD:R_0805_2012Metric | R2, R3, R4, R5, R6, R7, R8, R9 |
| 8 | LED | LED_THT:LED_D3.0mm | D1, D2, D3, D4, D5, D6, D7, D8 |
| 8 | SW_SPDT_MSM | Local:SPDT | SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 |
| 3 | 100n | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R10, R11 |
| 2 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1, J2 |
| 1 | 10u | Capacitor_SMD:CP_Elec_4x5.8 | C4 |
| 1 | ATmega328PB-AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H9.5mm | SW1 |
Similar boards
- 2 layers102 × 81.5 mm
C64pico
silvervest/c64pico
This is a tiny emulated C64 running on a Raspberry Pi Pico! Full details of the build can be found at https://www.youtube.com/watch?v=hgLhGpbC6E4
97 parts86 - 2 layers58.4 × 34.3 mm
SIO2SD
c0pperdragon/SIO2SD
An Arduino-based floppy drive emulator for the atari 8 bit computers.
26 parts83 - 2 layers200 × 100 mm
Regalodilara
valerionew/very-good-uc-doggos
A special graduation present for a special friend. Six microcontrollers in one devboard
91 parts50 - 2 layers88.9 × 50.8 mm
BLDC BIZ CARD
ageppert/Brushless-Motor-Biz-Card
A brushless motor and driver built in to a business card form-factor for learning and experimenting!
82 parts38MIT - 2 layers52.1 × 37.4 mm
Consolizer
orangeglo/PS2PSP
Board to connect a PS2 controller to a PSP 2000 (PSP Consolizer)
25 parts38GPL-3.0 - 2 layers67.3 × 54 mm
Jeep radio
latonita/jeep-canbus
Projects around CAN BUS in Chrysler Jeep - VES enabler, other small features
52 parts30MIT - 2 layers91.4 × 92.5 mm
Questions
How big is the SubSequence PCB?
It measures 80.3 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SubSequence use?
52 parts, built around the ATMEGA328PB-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SubSequence KiCad files?
From the marangisto/SubSequence repository on GitHub, at the commit this page was made from: the board is SubSequence.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SubSequence design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).