
Coco9511pak
barberd/coco9511pak
This board is a cartridge for the Tandy Radio Shack TRS-80 Color Computer (CoCo), an 8 bit computer produced between 1980 and 1991. It provides an Arithmetic Processor Unit (APU), the AMD 9511, to the CoCo.

Another clone of Xilinx parallel cable
Xilinx lpt cable is an open-source printed circuit board by maniekx86, from the maniekx86/xilinx_parallel_cable repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 31.5 × 53.8 mm with 12 parts on 33 nets, routed with 171 tracks and 2 vias.
It is built around the 74LS04PC and 74LS05P-E. Its parts include 4 resistors, 4 connectors, 2 capacitors and 2 ICs. It belongs with the fPGA and programmable logic boards of this library.
Another clone of Xilinx parallel cable. The logic is based on what I had in my spare parts at the time of design (7404 + 7405).
Connect this device to the PC using a DB-25 cable and provide +5V power to the J4 header, and you're ready to go.
| Pin | Function |
|---|---|
| 1 | GND |
| 2 | +5V |
| Pin | Function | Note |
|---|---|---|
| 1 | TMS | |
| 2 | TCK | |
| 3 | GND | |
| 4 | TDO | |
| 5 | TDI | |
| 6 | Vref | Connect to target device power |
| Marking | Value/Element | Package | Amount |
|---|---|---|---|
| C1 | 100n | SMD 0805 | 1 |
| C2 | 10u | Radial D5.0mm P2.50mm | 1 |
| J1 | DB-25 female connector | 1 | |
| J2 | Pin socket 1x6 | P2.54mm | 1 |
| J3 | Pin header 1x6 | P2.54mm | 1 |
| J4 | Pin header 1x2 | P2.54mm | 1 |
| R1 | 100 | SMD 0805 | 1 |
| R2-R4 | 470 (330 can be used too) | SMD 0805 | 3 |
| U1 | 7405 | DIP-14 | 1 |
| U2 | 7404 | DIP-14 | 1 |
This design was tested on prototype PCB

| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 10u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C2 |
| 1 | 74LS04 | Package_DIP:DIP-14_W7.62mm | U2 |
| 1 | 74LS05 | Package_DIP:DIP-14_W7.62mm | U1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | Conn_01x06_Socket | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J2 |
| 1 | DB25_Socket_MountingHoles | Connector_Dsub:DSUB-25_Socket_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset4.94mm | J1 |

barberd/coco9511pak
This board is a cartridge for the Tandy Radio Shack TRS-80 Color Computer (CoCo), an 8 bit computer produced between 1980 and 1991. It provides an Arithmetic Processor Unit (APU), the AMD 9511, to the CoCo.






CatspersCoffee/S100-Boards
S-100 bus boards designed and built: Z80 and 80386 CPU cards, SRAM/DRAM memory, CPLD/FPGA I/O and SPI boards, an 18-slot backplane and bus terminator.

It measures 31.5 × 53.8 mm and has 2 copper layers, 1.6 mm thick.
12 parts, built around the 74LS04PC and 74LS05P-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the maniekx86/xilinx_parallel_cable repository on GitHub, at the commit this page was made from: the board is xilinx_lpt_cable.kicad_pcb and its schematic xilinx_lpt_cable.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).