4 layers86.9 × 91.9 mm
2 layers50.8 × 22.9 mm
WingPixel
ManiacalLabs/WingPixel- Size
- 50.8 × 22.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 35
- Pads
- 105
- Tracks, vias
- 153, 4
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 9 Mar 2018
- Updated
- 24 Jun 2018
Overview
WingPixel is an open-source printed circuit board by ManiacalLabs, from the ManiacalLabs/WingPixel repository on GitHub, published under the MIT licence. It is a 2-layer board of 50.8 × 22.9 mm with 23 parts on 35 nets, routed with 153 tracks and 4 vias.
It is built around the LSF0102DCUR. Its parts include 8 connectors, 5 resistors, 2 capacitors, 2 ICs and 1 switch.
Main components
1README
README.mdWingPixel
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 200 | Resistors_SMD:R_0603 | R2, R3 |
| 2 | 330 | Resistors_SMD:R_0603 | R4, R5 |
| 2 | GS2 | ML_CutTrace:2-PinCutTrace | J7, J8 |
| 1 | 1000uf | Capacitors_SMD:CP_Elec_10x10 | C1 |
| 1 | 1uF | Capacitors_SMD:C_0603 | C3 |
| 1 | 200K | Resistors_SMD:R_0603 | R1 |
| 1 | Barrel_Jack | APM_BarrelJack:ML_BARREL_JACK_ROUND_PADS_SHORT | J1 |
| 1 | Conn_01x02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J6 |
| 1 | Conn_01x12 | Pin_Headers:Pin_Header_Straight_1x12_Pitch2.54mm | J4 |
| 1 | Conn_01x16 | Pin_Headers:Pin_Header_Straight_1x16_Pitch2.54mm | J3 |
| 1 | LOGO | LOGOS:logo_MLlabs_small | G*** |
| 1 | LSF0102DCUR | Housings_SSOP:VSSOP-8_2.4x2.1mm_Pitch0.5mm | U2 |
| 1 | SW_Push | Buttons_Switches_SMD:SW_SPST_KMR2 | SW1 |
| 1 | Screw_Terminal_01x04 | w_conn_mpt:mpt_0,5%2f4-2,54 | J2 |
| 1 | TriSolderJumper | TriSelectSolderJumper:TriSelectSolderJumper_HighCurrent | J5 |
| 1 | WingPixel | FeatherWing:FeatherWing_NoOutline | U1 |
The 19 most common of 23 parts.
Questions
How big is the WingPixel PCB?
It measures 50.8 × 22.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the WingPixel use?
23 parts, built around the LSF0102DCUR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the WingPixel KiCad files?
From the ManiacalLabs/WingPixel repository on GitHub, at the commit this page was made from: the board is PCB/WingPixel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the WingPixel design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers83.8 × 94.6 mm
- 6 layers139.7 × 133.4 mm
Teensy breakout
CMU-Robotics-Club/robobuggy-pcb
repository for CAD(s) for PCB(s) for Robobuggy.
90 parts - 4 layers108.5 × 92.8 mm
- 2 layers100 × 84.7 mm
MotorSignalConversion
WheelchairSeniorDesign/PCBs
The PCB designs for the wheelchair for our senior design project
30 parts1 - 2 layers65 × 56 mm
- 2 layers14 × 100 mm
Yunomi
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
23 parts3kApache-2.0 - 2 layers50.8 × 52.2 mm
