2 layers22.2 × 46.4 mm
C64-Switchless Quad Kernal Switcher
bwack/C64-Switchless-Multi-Kernal-27C256-adapter
Kernal switcher for the C64/C64C/C128
14 parts112
2 layers30.5 × 25.4 mm
ServoLaser
ManiacalLabs/ServoLaser1- Size
- 30.5 × 25.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 8
- Pads
- 32
- Tracks, vias
- 83, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Aug 2020
- Updated
- 15 Sep 2020
Overview
ServoLaser is an open-source printed circuit board by ManiacalLabs, from the ManiacalLabs/ServoLaser repository on GitHub, published under the MIT licence. It is a 2-layer board of 30.5 × 25.4 mm with 9 parts on 8 nets, routed with 83 tracks and 0 vias.
It is built around the ATTINY85-20PU. Its parts include 3 connectors, 1 capacitor, 1 resistor and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2 |
| 1 | 0.1uF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | ATTINY85-20PU | Package_DIP:DIP-8_W7.62mm | U2 |
| 1 | Conn_01x03 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | TrimPot | Potentiometer_THT:Potentiometer_Vishay_T73YP_Vertical | RV1 |
Questions
How big is the ServoLaser PCB?
It measures 30.5 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ServoLaser use?
9 parts, built around the ATTINY85-20PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ServoLaser KiCad files?
From the ManiacalLabs/ServoLaser repository on GitHub, at the commit this page was made from: the board is ServoLaser/ServoLaser.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ServoLaser design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers30.7 × 76.1 mm
Repeater v2
plusvic/simplebus2-intercom
General description of the Simplebus2 protocol used by some Comelit's intercoms. Hardware for retransmitting Simplebus2 messages over UART.
17 parts95CC0-1.0 - 2 layers101.5 × 54 mm
Simkarte
osmocom/osmocom-analog
Software Implementation of analog cellular telephony systems like NMT, TACS, IMTS, A/B/C-Netz; mirror of https://gitea.osmocom.org/cellular-infrastructure/osmocom-analog
15 parts32GPL-3.0 - 2 layers76.2 × 50.8 mm
Jerboa-8
strickyak/jerboa-attiny85-mod-synth
Modular Synthesizer using an ATtiny85 chip for each module.
23 parts31MIT - 2 layers
- 2 layers55.9 × 55.9 mm
- 2 layers71.1 × 40.6 mm
Tiny blinky
Hack-a-Day/Remoticon_KiCad_Blender
support files for the 2020 Remoticon KiCad to Blender > PCB renders workshop
21 parts22 - 2 layers242 × 60 mm
