4 layers44.7 × 29 mm
Pcb motor prototype 1
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
3 parts915
4 layers47.5 × 65 mm
Flyswatter2Adapter
MalVM/FlySwatter2SWD_AdapterAn adapter for flyswatter 2 to SWD with trim pot as resistors
- Size
- 47.5 × 65 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 22
- Pads
- 43
- Tracks, vias
- 45, 1
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 6 Mar 2025
- Updated
- 6 Mar 2025
Overview
Flyswatter2Adapter is an open-source printed circuit board by MalVM, from the MalVM/FlySwatter2SWD_Adapter repository on GitHub. It is a 4-layer board of 47.5 × 65 mm with 3 parts on 22 nets, routed with 45 tracks and 1 via.
It belongs with the interfaces and adapters boards of this library.
README
README.mdFlySwatter2SWD_Adapter
An adapter for flyswatter 2 to SWD with trim pot as resistors
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_02x10_Counter_Clockwise | Connector_IDC:IDC-Header_2x10_P2.54mm_Latch6.5mm_Vertical | J1, J2 |
| 1 | potentiometer_RM065 | PCM_SL_Devices:Potentiometer_RM065 | RV1 |
Similar boards
- 4 layers14.8 × 21 mm
- 4 layers27.3 × 13.2 mm
- 4 layers33.5 × 15 mm
- 4 layers19 × 9 mm
- 4 layers80 × 40 mm
Ground truth
Hongcheng-Gao/EngiWorld
Engiworld: What Can Frontier Agents Deliver in Professional Engineering Environments?
3 parts52MIT - 4 layers22.5 × 10 mm
Transformer
oresat/oresat-live-handheld-ground-station
MCAD, ECAD, software, firmware, build instructions, and everything else you should need for the OreSat Live Handheld Ground Station project.
3 parts20GPL-3.0 - 4 layers6.5 × 7 mm
Questions
How big is the Flyswatter2Adapter PCB?
It measures 47.5 × 65 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Flyswatter2Adapter use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Flyswatter2Adapter KiCad files?
From the MalVM/FlySwatter2SWD_Adapter repository on GitHub, at the commit this page was made from: the board is Flyswatter2Adapter/Flyswatter2Adapter.kicad_pcb and its schematic Flyswatter2Adapter/Flyswatter2Adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Flyswatter2Adapter design in my own project?
Its repository states no licence, so its author keeps all rights: ask MalVM before reusing the design.