

PowerAddOn
- Size
- 80 × 44 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 15
- Pads
- 83
- Tracks, vias
- 206, 11
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 May 2024
- Updated
- 12 Jun 2024
Overview
PowerAddOn is an open-source printed circuit board by Maltheren, from the Maltheren/Bilag-P2 repository on GitHub. It is a 2-layer board of 80 × 44 mm with 31 parts on 15 nets, routed with 206 tracks and 11 vias.
Its parts include 7 capacitors, 5 connectors, 4 resistors, 4 diodes and 2 ICs.
README
README.mdBilag til P2 projektet ESD210
Alle eksterne bilag til P2 projektet for ESD210 hvor der kan findes følgende mapper:
Kicad filer
Alle kredsløbsdiagrammer samt PCB designs. Under mappen /PDF kan alle schematics findes i pdf format.
Kode produkt
De endelige 3 sketches for produktet. Det anbefales at åbne dem via platformIO. Ellers kan den primære funktionskode findes i /src/main.cpp, samt de udviklede libraries under /lib. Eksternt brugte libraries i dette projekt er:
- "Arduino.h"
- "RF24.h"
Tests
Her forefindes de forskellige tests opdelt som enten samlet, Klokke eller MKF
PC oscilloskop
For at visualisere de samples der tages af arduinoen på MKF-modulet benyttes følgende værktøj https://x-io.co.uk/serial-oscilloscope/
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | LED | LED_THT:LED_D3.0mm | D1, D2, D3, D4 |
| 3 | 100u | Capacitor_THT:CP_Axial_L10.0mm_D6.0mm_P15.00mm_Horizontal | CF1, CF2, CF3 |
| 3 | 10n | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C1, C2, C8 |
| 2 | 100uH | Inductor_THT:L_Radial_D10.0mm_P5.00mm_Fastron_07P | LX-1, LX+1 |
| 2 | 1N5817 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | DX-1, DX+1 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_4.0x4.0mm | TP1, TP2 |
| 1 | +12VConnector | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J4 |
| 1 | -12VConnector | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J5 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 10u | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C4 |
| 1 | 150R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 1u | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C3 |
| 1 | 2u2 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 1 | 330R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 3V3Connector | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J2 |
| 1 | 5VConnector | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | LE33CZ_TO92 | Package_TO_SOT_THT:TO-92_Inline | U2 |
| 1 | MAX743CPE | MAX743CPE:DIP794W47P254L1943H457Q16 | IC1 |
More from Maltheren/Bilag-P2
5- 2 layers233.2 × 96.4 mm

- 2 layers

- 2 layers

- 2 layers67 × 42 mm

- 2 layers

Similar boards
- 2 layers44.5 × 46.9 mm

OSO SWAT B1-jig
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
31 parts2.1k - 2 layers65 × 30 mm

Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
31 parts1kGPL-3.0 - 2 layers191 × 98.5 mm

MacroKeypad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
31 parts915 - 2 layers39 × 45.2 mm

CH32V003F4P6-R0-1v1
openwch/ch32v003
CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10
31 parts599 - 2 layers26.7 × 27.9 mm

Breakout board
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
31 parts546MIT - 2 layers100 × 50 mm

Pixelix
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.
31 parts447MIT - 2 layers77.2 × 69.8 mm

- 2 layers103 × 55 mm

Questions
How big is the PowerAddOn PCB?
It measures 80 × 44 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PowerAddOn use?
31 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PowerAddOn KiCad files?
From the Maltheren/Bilag-P2 repository on GitHub, at the commit this page was made from: the board is Kicad filer/PowerAddOn/PowerAddOn/PowerAddOn.kicad_pcb and its schematic Kicad filer/Klokkemodul_Barebone_Rev1/Klokkemodul_Barebone_Rev1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PowerAddOn design in my own project?
Its repository states no licence, so its author keeps all rights: ask Maltheren before reusing the design.