4 layers67.6 × 56.9 mm
4 layers86 × 125 mm
Nautilus project template PCB
malinjas/nautilus-test2-PCB- Size
- 86 × 125 mm
- Copper layers
- 4
- Thickness
- 1.58 mm
- Parts
- 45
- Nets
- 77
- Pads
- 275
- Tracks, vias
- 150, 22
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 20 Feb 2026
- Updated
- 20 Feb 2026
Overview
Nautilus project template PCB is an open-source printed circuit board by malinjas, from the malinjas/nautilus-test2-PCB repository on GitHub. It is a 4-layer board of 86 × 125 mm with 45 parts on 77 nets, routed with 150 tracks and 22 vias.
It is built around the STM32L451CET6, TCAN330GD and 150060GS73220, with the 150060RS73220 and 150060YS73220 among its other parts. Its parts include 10 capacitors, 9 resistors, 5 diodes, 3 ICs and 3 connectors. It belongs with the STM32 boards of this library.
Main components
5
STM32L451CET6
LQFP-48(7x7)Microcontrollers (MCU/MPU/SOC)STMicroelectronics
TCAN330GD
SOIC-8-40℃~+125℃ 2.5uA 3.3V 55mA 5Mbps CAN FD Transceiver SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN Transceivers
150060GS73220
0603-40℃~+85℃ 120° 20mA 3.2V 520nm 525nm 700mcd 78mW Discrete Diode Green Water Clear 0603 LED Indication - Discrete ROHSWürth ElektronikLight Emitting Diodes (LED)
150060RS73220
0603120° 20mA 2V 624nm 632nm 90mcd Red Water Clear 0603 LED Indication - Discrete ROHSWürth ElektronikLED Indication - Discrete150060YS73220
0603100mcd 120° 20mA 2V 589nm 591nm Water Clear Yellow 0603 LED Indication - Discrete ROHSWürth ElektronikLight Emitting Diodes (LED)
README
README.mdGeneration complete!
NAUTILUS Project Template Board
Include documentation here
The documentation can be very similar to your wiki article
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C4, C7, C9 |
| 5 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3, JP4, JP5, JP6, JP7 |
| 4 | 2.2k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R5 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R4, R6, R7 |
| 3 | TestPoint | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP1, TP3, TP4 |
| 2 | 10pF | Capacitor_SMD:C_0603_1608Metric | C3, C27 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C5, C6 |
| 2 | 7790 Mounting | dz_mech:Keystone-7790 | M1, M2 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 150060GS73220 | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | 150060RS73220 | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | 150060YS73220 | LED_SMD:LED_0603_1608Metric | D11 |
| 1 | 16.0MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 710-82402374 | Package_TO_SOT_SMD:SOT-23-5 | D21 |
| 1 | 824094024 | dz_dio:SOT95P240X104-3N | D1 |
| 1 | ADM1818 | Package_TO_SOT_SMD:SOT-23 | U3 |
| 1 | Button | dz_mech:M-WE-BUTTON-412302582 | SW3 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | J3 |
| 1 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP2 |
| 1 | Mainboard PCIe x8 | Connector_PCBEdge:BUS_PCIexpress_x8 | J1 |
| 1 | STDC-14 Debug | dz_con:FTSH-107-XX-YYY-DV | J8 |
| 1 | STM32L451CET6 | dz_mcu:STM32L451CET6 | U8 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | TCAN330GD | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U1 |
| 1 | TestPoint | TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP6 |
Similar boards
- 4 layers48 × 106.5 mm
Kicad cassandra
ayham-1/cassandra
A CMSIS-DAP/CAN Bus viewer/CAN Payload Injector doodad, with functionality for libumdr (formula student).
54 parts - 2 layers215.9 × 101.6 mm
- 4 layers41.7 × 27.4 mm
- 2 layers30.5 × 25 mm
NOGUSB
dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere
35 parts14Apache-2.0 - 2 layers
Noggin f072cb
berkeleyauv/RoboSub_HW
PCB designs for Underwater Robotics at Berkeley (UR@B)
26 parts3GPL-3.0 - 4 layers40 × 23 mm
- 4 layers19.1 × 19 mm
Questions
How big is the Nautilus project template PCB PCB?
It measures 86 × 125 mm and has 4 copper layers, 1.58 mm thick.
What parts does the Nautilus project template PCB use?
45 parts, built around the STM32L451CET6, TCAN330GD, 150060GS73220 and 150060RS73220. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nautilus project template PCB KiCad files?
From the malinjas/nautilus-test2-PCB repository on GitHub, at the commit this page was made from: the board is PCB/nautilus-project-template-PCB.kicad_pcb and its schematic PCB/can.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nautilus project template PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask malinjas before reusing the design.