2 layers57.9 × 53.8 mm
Sanni pro
makhowastaken/cartreader
A smaller, more portable, more modular version of https://github.com/sanni/cartreader
19 parts27GPL-3.0
2 layers53.8 × 57.9 mm
Sanni pro
makhowastaken/cartreader27A smaller, more portable, more modular version of https://github.com/sanni/cartreader
- Size
- 53.8 × 57.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 97
- Pads
- 196
- Tracks, vias
- 405, 23
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 11 Mar 2020
- Updated
- 14 Feb 2025
Overview
Sanni pro is an open-source printed circuit board by makhowastaken, from the makhowastaken/cartreader repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 53.8 × 57.9 mm with 28 parts on 97 nets, routed with 405 tracks and 23 vias.
It is built around the IRF7317PBF and MMBD7000LT1G. Its parts include 6 resistors, 5 connectors, 3 capacitors, 2 switches and 1 IC.
Main components
2
IRF7317PBF
SOP-8-55℃~+150℃ 1 N-Channel + 1 P-Channel 200pF 20V 27nC@4.5V、29nC@4.5V 2W 430pF 5.3A 58mΩ@4.5V 700mV、700mV 900pF N-Channel + P-Channel ±12V SOP-8 MOSFETs ROHSInfineon TechnologiesMOSFETs
MMBD7000LT1G
SOT-23-55℃~+150℃@(Tj) 1 Pair Series Connection 200mA 225mW 2A 3uA@100V 4ns 75V 820mV@10mA SOT-23 Switching Diodes ROHSFUXINSEMISwitching Diodes
README
PCB Files/adapters/sanni_snes_shield/readme.mdsnes / sfc adapter
Version 1.2c renders
this is a work in progress. This is currently tested and confirmed working but some things are in dumb spots. I kinda just winged this whole thing.
BOM: (todo) The cart slot, CIC lock hardware, clock signal generator, two more of the SPDT switches that you used for the control unit, and probably something else that I'm forgetting.
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2, R3 |
| 2 | 10K | misc_footprints:Resistor-hybrid-3pad | R5, R6 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | B1, B2 |
| 2 | SW_Push | misc_footprints:MX-Alps-Choc-1U-NoLED_fixed | MX1, MX2 |
| 2 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3 |
| 1 | 3.3V_REGULATOR | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J5 |
| 1 | 300K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4 |
| 1 | 5V_REGULATOR | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J4 |
| 1 | Battery | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | IRF7317PbF | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q1 |
| 1 | MEGA2560PRO-EMBED | misc_footprints:MEGA2560PRO-EMBED | MEGA2560PRO101 |
| 1 | MMBD7000LT1G | Diode_SMD:D_SOT-23_ANK | D1 |
| 1 | OLED | misc_footprints:OLED_Module | J2 |
| 1 | ON / OFF Button | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | RGB_LED | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | SW_SPDT | Button_Switch_THT:SW_CuK_OS102011MA1QN1_SPDT_Angled | SW2 |
| 1 | Val** | misc_footprints:makho_micro_fmask | Ref** |
| 1 | tp4056_board | misc_footprints:4056E_LiIon_loader_SMT | U3 |
| 1 | uSD | misc_footprints:Catalex_uSD_BSilk | J6 |
More from makhowastaken/cartreader
4- 2 layers95.7 × 58.3 mm
Sanni flash
makhowastaken/cartreader
A smaller, more portable, more modular version of https://github.com/sanni/cartreader
10 parts27GPL-3.0 - 2 layers70 × 220.2 mm
Sanni snes
makhowastaken/cartreader
A smaller, more portable, more modular version of https://github.com/sanni/cartreader
8 parts27GPL-3.0 - 2 layers38.1 × 53.8 mm
Sanni gba
makhowastaken/cartreader
A smaller, more portable, more modular version of https://github.com/sanni/cartreader
2 parts27GPL-3.0
Similar boards
- 2 layers12.9 × 9 mm
Momentary Power Toggle
makhowastaken/Soft-Latching-Power-Button
A simple circuit for implementing a momentary power switch
13 parts24GPL-3.0 - 2 layers20.3 × 12.7 mm
- 2 layers44.5 × 72.7 mm
OSO SWAT C1-jig
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
28 parts2.1k - 2 layers95 × 54 mm
EinkPDA screen
TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.
28 parts2kApache-2.0 - 2 layers137.2 × 41.5 mm
Breakout 64pin 176122-6-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
28 parts1.2k - 2 layers45 × 45 mm
Smartbuttons
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
28 parts915 - 2 layers24.1 × 36.2 mm
Esp32miniBT
asterics/esp32_mouse_keyboard
ESP32 implementation for HID over GATT Keyboard and Mouse (Bluetooth Low Energy). Including serial API for external modules (similar to Adafruit EZKey HID)
28 parts911GPL-3.0 - 2 layers34.8 × 12.2 mm
Questions
How big is the Sanni pro PCB?
It measures 53.8 × 57.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sanni pro use?
28 parts, built around the IRF7317PBF and MMBD7000LT1G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sanni pro KiCad files?
From the makhowastaken/cartreader repository on GitHub, at the commit this page was made from: the board is PCB Files/control unit/1.3/sanni_pro.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sanni pro design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).