2 layers252.9 × 77.6 mm
2 layers100 × 100 mm
Matrixmixer
makervan/matrixmix8Matrix Mixer
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 58
- Nets
- 54
- Pads
- 240
- Tracks, vias
- 366, 16
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 11 Dec 2017
- Updated
- 30 Mar 2026
Overview
Matrixmixer is an open-source printed circuit board by makervan, from the makervan/matrixmix repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 100 × 100 mm with 58 parts on 54 nets, routed with 366 tracks and 16 vias.
Its parts include 18 connectors and 16 resistors. It belongs with the audio and music and lEDs and displays boards of this library.
README
README.mdMatrixMix
Matrix mixer. Currently only 4 inputs, 4 outputs, passive. Option for passthrough sync. There's an extension port to chain mulitple mixers together, for more inputs, or add a separate amplifer for the outputs.
License
Created by Severin Schols, and shared under CC-BY-SA-4.0. See LICENSE for more information.
Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 100k | added:Potentiometer_Alpha-RV09 | RV1, RV2, RV3, RV4, RV5, RV6, RV7, RV8, RV9, RV10, RV11, RV12, RV13, RV14, RV15, RV16 |
| 16 | 10k | Resistors_THT:Resistor_Horizontal_RM10mm | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16 |
| 8 | Stereo/Sync | Pin_Headers:Pin_Header_Straight_1x03 | P1, P2, P3, P4, P5, P6, P7, P8 |
| 2 | EXT | Pin_Headers:Pin_Header_Angled_2x05 | P9, P10 |
| 2 | LOGO | added:LOGO | G***, G*** |
| 2 | Output 4 | added:AudioJack3.5mm | J7, J8 |
| 1 | Input 1 | added:AudioJack3.5mm | J1 |
| 1 | Input 2 | added:AudioJack3.5mm | J2 |
| 1 | Input 3 | added:AudioJack3.5mm | J3 |
| 1 | Input 4 | added:AudioJack3.5mm | J4 |
| 1 | Output 1 | added:AudioJack3.5mm | J5 |
| 1 | Output 2 | added:AudioJack3.5mm | J6 |
The 52 most common of 58 parts.
Questions
How big is the Matrixmixer PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Matrixmixer use?
58 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Matrixmixer KiCad files?
From the makervan/matrixmix repository on GitHub, at the commit this page was made from: the board is passive-4x4/matrixmixer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Matrixmixer design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers50 × 50 mm
- 2 layers97.3 × 71 mm
ZynScreen v1.5
zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...
58 parts156 - 2 layers34 × 46 mm
- 2 layers148 × 81 mm
Communicator pcb
Hack-a-Day/2025-Communicator_Badge
The 2025 Hackaday Supercon RF Communicator Badge
58 parts107MIT - 2 layers53.3 × 36.3 mm
- 2 layers70 × 30.3 mm
Pico 2HP Audio
rheslip/2HPico-Eurorack-Module-Hardware
2HP Eurorack module based on Raspberry Pi Pico 2
58 parts84 - 2 layers35.7 × 34.2 mm
Wideband controller
mck1117/wideband
The firmware/boards directory contains configuration for each board this firmware supports.
58 parts81MIT