
OOKeyboard
mayermakes/00Keyboard
an open source ortholinear BLE keyboard. from scratch, including Firmware, video on element14presents

Dev NOTE: before commit, run ./kibot.sh to regenerate documentation, bom, gerbers and other assets.
Led64-hub75e is an open-source printed circuit board by makerspacelt, from the makerspacelt/led64-hub75e repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 100 × 100 mm with 38 parts on 50 nets, routed with 230 tracks and 401 vias.
It is built around the ESP32-S3-WROOM-1-N8 and USBLC6-2SC6. Its parts include 6 capacitors, 5 resistors, 3 connectors, 2 ICs and 2 switches. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | MP | MountingHole:MountingHole_3.5mm_Pad_Via | H1, H2, H3, H4, H5, H6, H7 |
| 6 | 47u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C6 |
| 3 | 4k7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3 |
| 2 | 22R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5 |
| 2 | USR_BTN | -local:1TS003B-2400-3500A-CT | SW1, SW2 |
| 1 | 3u3 | Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder | L1 |
| 1 | G*** | kibuzzard-69D85B97 | kibuzzard-69D85B97 |
| 1 | G*** | kibuzzard-69D857A4 | kibuzzard-69D857A4 |
| 1 | G*** | kibuzzard-69D857F8 | kibuzzard-69D857F8 |
| 1 | G*** | kibuzzard-69D8587C | kibuzzard-69D8587C |
| 1 | G*** | kibuzzard-69D857B6 | kibuzzard-69D857B6 |
| 1 | G*** | kibuzzard-69D8586C | kibuzzard-69D8586C |
| 1 | G*** | kibuzzard-69D85711 | kibuzzard-69D85711 |
| 1 | G*** | kibuzzard-69C5DC72 | kibuzzard-69C5DC72 |
| 1 | HUB-75E | Connector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_Vertical_SMD | J2 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | LOGO | -local:qr | G*** |
| 1 | LOGO_KMS | -local:logo_kms_small_silkscreen | G2 |
| 1 | Logo_Open_Hardware_Large | Symbol:OSHW-Symbol_6.7x6mm_SilkScreen | G1 |
| 1 | PWR | -local:SolderWire-1.5sqmm_1x04_P5.0mm_D1.7mm_OD3.9mm_Relief2x | J3 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U1 |
| 1 | USB_C_Receptacle_USB2.0 | -local:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | esp32-s3-wroom-1 | -local:esp32-s3-wroom-1 | U2 |

mayermakes/00Keyboard
an open source ortholinear BLE keyboard. from scratch, including Firmware, video on element14presents

romioRN/Dash6.8-hardware
wifi name "service", password 12345678, connect to 192.167.4.1

eggsampler/ESP32-S3-Breakout
A minimal breakout board for the ESP32-S3-WROOM module


PSU-Ext-Org/psu-ext-hardware
A repository to store PSU-EXT hardware design assets, schematics, circuit diagrams, CAD files and manufacturing data.

dulerabbit/GaggiBre-legacy
This is GaggiBre! a fork of Gaggimate with Manual Brew Control and Adaptive Mode. Made by Dule Rabbit

bismarx-v1/PRTGN
OwO whats this (This repo contains electronics, mechanical and software data for a protogen visor)

animesh-chouhan/open-telegraph
A pocket-size Morse key. One button, one RGB LED, an ESP32-S3, and a battery. Plug it in over USB-C or pair it over Bluetooth and it types Morse into any device as a standard keyboard. Fully open, down to the copper.
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
38 parts, built around the ESP32-S3-WROOM-1-N8 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the makerspacelt/led64-hub75e repository on GitHub, at the commit this page was made from: the board is project/project.kicad_pcb and its schematic project/project.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).