2 layers20.5 × 24.8 mm
2 layers18 × 26 mm
This is ESP-12F interface to connect with the esp-flasher, featuring pogo-pin snap-on design.
- Size
- 18 × 26 mm
- Copper layers
- 2
- Thickness
- 0.8 mm
- Parts
- 8
- Nets
- 16
- Pads
- 39
- Tracks, vias
- 32, 0
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 19 Mar 2023
- Updated
- 4 Jun 2023
Overview
Top is an open-source printed circuit board by makerspacelt, from the makerspacelt/esp-flasher-12f repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 18 × 26 mm with 8 parts on 16 nets, routed with 32 tracks and 0 vias.
Its parts include 1 IC and 1 connector.
README
README.md
This is ESP-12F interface to connect with the esp-flasher, featuring pogo-pin snap-on design.
- Designed to snap on top of any ESP-12F module without any provisions for programming or debugging in-place
Support this open-source project - buy your fully assembled and tested device here
Dev NOTE: before commit, run ./kibot.sh to regenerate documentation, gerbers and other assets.
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | G*** | kibuzzard-642C03F5 | kibuzzard-642C03F5 |
| 1 | G*** | kibuzzard-642C04F0 | kibuzzard-642C04F0 |
| 1 | G*** | kibuzzard-642C03EC | kibuzzard-642C03EC |
| 1 | G*** | kibuzzard-642C0B87 | kibuzzard-642C0B87 |
| 1 | IDC 2x8 | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J1 |
| 1 | LOGO_KMS | -local:logo_kms_small_silkscreen | G2 |
| 1 | board_outline | -local:board | SYM1 |
| 1 | top | -local:esp-top | U1 |
Questions
How big is the Top PCB?
It measures 18 × 26 mm and has 2 copper layers, 0.8 mm thick.
What parts does the Top use?
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Top KiCad files?
From the makerspacelt/esp-flasher-12f repository on GitHub, at the commit this page was made from: the board is project/top.kicad_pcb and its schematic project/top.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Top design in my own project?
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers14.4 × 10.5 mm
OSO SWAB B1-00 Sensor Watch Accelerometer
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
8 parts2.1k - 2 layers7.9 × 39.1 mm
Brain board STM32F407 SD wing it
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
8 parts1.2k - 2 layers59.9 × 25.7 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
8 parts1kGPL-3.0 - 2 layers52 × 12.6 mm
USB
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
8 parts960Apache-2.0 - 2 layers87.5 × 48.5 mm
7 input macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
8 parts915 - 2 layers36.2 × 63.1 mm
PicoMemcard pico
dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico
8 parts694GPL-3.0 - 2 layers36 × 10 mm
PCB4-PWR BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
8 parts578Apache-2.0