2 layers66.9 × 74.5 mm
2 layers50 × 73.9 mm
Makerauto
MakersAsylumIndia/makerauto1blinky badge for the Maker Auto
- Size
- 50 × 73.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 7
- Pads
- 30
- Tracks, vias
- 41, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 11 Aug 2016
- Updated
- 13 Aug 2016
Overview
Makerauto is an open-source printed circuit board by MakersAsylumIndia, from the MakersAsylumIndia/makerauto repository on GitHub. It is a 2-layer board of 50 × 73.9 mm with 20 parts on 7 nets, routed with 41 tracks and 0 vias.
Its parts include 9 connectors, 3 resistors and 3 diodes.
README
README.mdmakerauto
blinky badge for the Maker Auto
FEATURES
- Three LED's with series current limit resistors
- One CR2032 Coin Battery
- Use either One, Two or Three LEDs.
- Use Red, Green and Blue LEDs, or all White LEDs or whatever you choose
- Use a Blinking LED
- Replace Resistor with LDR to have light controlled brightness
LEARN
- How to Solder
- Resistor Color Code
- Use of Multimeter to check LED, Resistor and Battery
DISCUSSION FORUM : http://discuss.makersasylum.com/t/maker-auto-rickshaw/55/36
rev1 renders
License
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Pin | makerauto:MTG_0mm8 | P4, P5, P6, P7, P8, P9 |
| 3 | 47E | makerauto:r_0805 | R1, R2, R3 |
| 2 | Mirror | makerauto:MTG_3mm | P2, P3 |
| 1 | BATT_HOLDER | makerauto:cr2032_02 | BT1 |
| 1 | Blu | makerauto:LED-5MM | D3 |
| 1 | Grn | makerauto:LED-5MM | D2 |
| 1 | LOGO | makerauto:logo_asylum | G*** |
| 1 | LOGO | makerauto:logo_autodesk | G*** |
| 1 | LOGO | makerauto:ma_silk | G*** |
| 1 | Logo_MA | makerauto:ma_logo | P1 |
| 1 | OPEN_HARDWARE_1 | makerauto:Logo_silk_OSHW_6x6mm | LOGO1 |
| 1 | Red | makerauto:LED-5MM | D1 |
Questions
How big is the Makerauto PCB?
It measures 50 × 73.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Makerauto use?
20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Makerauto KiCad files?
From the MakersAsylumIndia/makerauto repository on GitHub, at the commit this page was made from: the board is kicad/makerauto.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Makerauto design in my own project?
Its repository states no licence, so its author keeps all rights: ask MakersAsylumIndia before reusing the design.
Similar boards
- 2 layers86.4 × 64.8 mm
- 2 layers36.2 × 26.8 mm
Esp32 minimal
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
20 parts4kMIT - 2 layers108.1 × 393.8 mm
Sweep compact ble
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
20 parts2.1k - 2 layers26 × 15.9 mm
TPS54340 Buck Regulator
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
20 parts1.2k - 2 layers67.6 × 30.5 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
20 parts1kGPL-3.0 - 2 layers44.3 × 28.7 mm
Lin bus adapter esp32
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915 - 2 layers89.5 × 61.6 mm
FreeDeck TH 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
20 parts772