2 layers38.1 × 57.2 mm
Tiny macropad
maker-lukas/Scroll-Dial
A scroll dial using the AS5600 sensor and a small macropad
16 parts2
2 layers21.2 × 116.2 mm
Scroll dial
maker-lukas/Scroll-Dial2A scroll dial using the AS5600 sensor and a small macropad
- Size
- 21.2 × 116.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 20
- Pads
- 67
- Tracks, vias
- 110, 15
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 15 Nov 2025
- Updated
- 10 Dec 2025
Overview
Scroll dial is an open-source printed circuit board by maker-lukas, from the maker-lukas/Scroll-Dial repository on GitHub. It is a 2-layer board of 21.2 × 116.2 mm with 20 parts on 20 nets, routed with 110 tracks and 15 vias.
It is built around the OS102011MS2QN1. Its parts include 4 resistors, 3 connectors, 2 capacitors, 2 ICs and 1 switch. It belongs with the keyboards and input boards and the nRF52 and nRF5x boards of this library.
Main components
1README
README.mdScroll-Dial
A scroll dial using the AS5600 sensor and a small macropad for ajusting stuff like functionality
Features
- Smooth and very accurate scrolling up to 0.08°
- AS5600 sensor
- Wireless
- Macropad for more functionality
BOM
| Part | Quantity | Price | Link | Notes |
|---|---|---|---|---|
| PCB | 5 | $8.84 | jlcpcb | |
| Bearing | 1 | $42.19 | aliexpress | |
| Leds | 100 | $4.51 | aliexpress | |
| 3v to 5V step up | 1 | $2.54 | aliexpress | |
| Battery | 2 | $8.03 | aliexpress | |
| Keycaps | 10 | $4.78 | aliexpress | |
| Power Switch | 10 | $10.38 | aliexpress | |
| Pin Header | 10 | $1.28 | aliexpress | |
| AS5600 board | 1 | $1.31 | aliexpress | To desolder components |
Total: $83.86
Overview
This will cover the PCB, Schematic and 3D models of both the Sccoll dial as the Macropad
Schematic
The Schematic was made in KiCAD
| Dial | Macropad |
|---|---|
 |  |
PCB
The PCB's was made in KiCAD
| Dial | Macropad |
|---|---|
 |  |
3D models
All the models were made in Fusion
Dial
| Base | Top | Bottom |
|---|---|---|
 |  |  |
| Base with PCB | Fully built | Bare PCB |
 |  |  |
Macropad
| Top | Side | ON/OFF and USBC |
|---|---|---|
 |  |  |
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | MountingHole | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H1, H2, H3, H4, H5, H6, H7, H8 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 100 nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 6,7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | AS5600 | AS5600:SOIC8 | U1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.00mm:PinHeader_1x05_P2.00mm_Vertical | J3 |
| 1 | Conn_01x05_Pin | Connector_PinSocket_2.00mm:PinSocket_1x05_P2.00mm_Vertical | J2 |
| 1 | OS102011MS2QN1 | Button_Switch_THT:SW_Slide_SPDT_Straight_CK_OS102011MS2Q | S1 |
| 1 | XIAO-nRF52840-SMD | Seeed Studio XIAO Series Library:XIAO-nRF52840-SMD | U3 |
Questions
How big is the Scroll dial PCB?
It measures 21.2 × 116.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Scroll dial use?
20 parts, built around the OS102011MS2QN1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Scroll dial KiCad files?
From the maker-lukas/Scroll-Dial repository on GitHub, at the commit this page was made from: the board is Kicad/scroll dial/scroll dial.kicad_pcb and its schematic Kicad/scroll dial/scroll dial.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Scroll dial design in my own project?
Its repository states no licence, so its author keeps all rights: ask maker-lukas before reusing the design.
More from maker-lukas/Scroll-Dial
1Similar boards
- 2 layers100 × 100 mm
- 4 layers60 × 60 mm
3117 AUSIGN
r4hulrr/ausign
Real-time Auslan (Australian Sign Language) to English speech translation glove. Built with ESP32-S3, flex sensors, IMU on a custom PCB, and a Bluetooth-connected Python GUI.
151 parts3MIT - 4 layers97.8 × 97.8 mm
PTERODACTYL v4
mahruschow/team-pterodactyl
UMD near-space PTERODACTYL KiCad sensor-board working design
51 parts2 - 2 layers134 × 80.5 mm
- 2 layers100 × 80 mm
Speakerpcb
gmaxdragon/Seizo-Noise
A massive PCB for a speaker for my robotic arm with a microphone built into it and a ton of other GPIO ports.
52 parts1 - 2 layers100 × 100 mm
- 4 layers120 × 112 mm
- 2 layers29.5 × 21.6 mm
RC Hotwheels
404boboo/RC-Hotwheels
This repository contains all the files and documentation for our DIY remote-controlled Hot Wheels car. We designed our own custom PCB using KiCad, featuring a NRF24L01 transceiver(We only used it as a receiver for now)…
16 parts