Skip to the content
2 layers204.8 × 78 mmOmega 4 solder, the printed circuit board in 3D

Omega 4 solder

makenova/omega8

A keybaord with inspiration from the zlant and alpha 28

Size
204.8 × 78 mm
Copper layers
2
Thickness
1.6 mm
Parts
74
Nets
57
Pads
435
Tracks, vias
395, 11
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
1 Jun 2020
Updated
9 Aug 2022

Overview

Omega 4 solder is an open-source printed circuit board by makenova, from the makenova/omega repository on GitHub. It is a 2-layer board of 204.8 × 78 mm with 74 parts on 57 nets, routed with 395 tracks and 11 vias.

Its parts include 35 diodes and 1 IC. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.

README

README.md

Omega

Hot swap tracespace layer

Solder tracespace layer

Omega4 tracespace layer

The omega is a hot swap 30%(30 or 29 keys depending on the layout you choose) inspired by the Zlant and the Alpha 28 keyboards.
The omeaga4 adds a 4th with a few options to make this more than a novelty piece.

The plate files, stls for 3D printing, and STEP files can be found in the docs folder.
There are also gerbers already generated in the gerber folders.

KLE Diagram
KLE Diagram

Parts

74
QtyValueFootprintReferences
35D_SmallKeebio-Parts:Diode-Hybrid-BackD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +19
34MX-NoLEDMX_Only:MXOnly-1U-NoLEDMX1, MX2, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX17, MX18, MX19, MX20, MX21, MX22, MX23 +18
1Jumper_NO_Smallrandom-keyboard-parts:Jumper-UserFriendly-SmallJP1
1MX-NoLEDMX_Only:MXOnly-6U-Centered-NoLEDMX37
1MX-NoLEDMX_Alps_Hybrid:MX-10U-ReversedStabilizers-NoLEDMX33
1MX-NoLEDMX_Only:MXOnly-6U-ReversedStabilizers-NoLEDMX36
1ProMicropromicro:ProMicroU1

More from makenova/omega

1
  • 2 layers200.8 × 58.9 mmOmega solder, the printed circuit board in 3D

    Omega solder

    makenova/omega

    A keybaord with inspiration from the zlant and alpha 28

    67 parts8

Similar boards

  • 2 layers141.1 × 126.8 mmCalculator, the printed circuit board in 3D

    Calculator

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    74 parts915
  • 2 layers49 × 44 mmSimple keeb reuser, the printed circuit board in 3D

    Simple keeb reuser

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    74 parts253GPL-3.0
  • 2 layers49 × 49 mmOSBMS Balancer Rev1 sot323, the printed circuit board in 3D

    OSBMS Balancer Rev1 sot323

    Teslafly/Dead-OpenBMS-dead

    A scalable, open source battery management system

    74 parts248
  • 2 layers72.4 × 72.4 mmSerialResonantFilter, the printed circuit board in 3D

    SerialResonantFilter

    profdc9/RFBitBanger

    A QRP digital transceiver created from readily available parts for off-the-grid maintenance

    74 parts222
  • 2 layers58 × 65 mmSidechain mixer core, the printed circuit board in 3D

    Sidechain mixer core

    shmoergh/moduleur

    Fully analog DIY-friendly modular synth

    74 parts222
  • 2 layers110 × 60 mmArduino Spot Welder, the printed circuit board in 3D

    Arduino Spot Welder

    KaeptnBalu/Arduino_Spot_Welder_V3

    This is the Kicad project for V3.1 The Arduino Board was not changed, only the Mosfet Board got a updgrade.

    74 parts207GPL-3.0
  • 2 layers51.5 × 89 mmMobo, the printed circuit board in 3D

    Mobo

    opulo-inc/feeder

    Source for LumenPnP Feeders

    74 parts202
  • 2 layers165.7 × 152.4 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-UART-Computer-1-2

    Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed

    74 parts184

Questions

How big is the Omega 4 solder PCB?

It measures 204.8 × 78 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Omega 4 solder use?

74 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Omega 4 solder KiCad files?

From the makenova/omega repository on GitHub, at the commit this page was made from: the board is omega_soldered/omega_4_solder.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Omega 4 solder design in my own project?

Its repository states no licence, so its author keeps all rights: ask makenova before reusing the design.