2 layers65 × 56.5 mm
Doorbot
makeitlabs/doorbot
Doorbot is an RFID access control platform, primarily intended for exterior doors in a makerspace environment. Based on Raspberry Pi 3b+, PoE hat, and a custom interface hat.
82 parts2
2 layers
Doorbot lcd
makeitlabs/doorbot2Doorbot is an RFID access control platform, primarily intended for exterior doors in a makerspace environment. Based on Raspberry Pi 3b+, PoE hat, and a custom interface hat.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 5
- Nets
- 12
- Pads
- 24
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 24 Jul 2015
- Updated
- 24 Nov 2021
Overview
Doorbot lcd is an open-source printed circuit board by makeitlabs, from the makeitlabs/doorbot repository on GitHub. It is a 2-layer board with 5 parts on 12 nets.
It belongs with the lEDs and displays boards of this library.
README
README.mddoorbot
Doorbot is a Python-based RFID access control system that is generally run on Raspberry Pi or other Linux-based systems. It was primarily developed to control physical access to exterior doors in our Makerspace facility.
Doorbot can run 'headless' with no display (typically using an LED for user feedback), or optionally provide a GUI display for rich user feedback.
Doorbot exists alongside RATT (https://github.com/makeitlabs/ratt/), which is a lower-cost RFID access control endpoint implemented on an entirely different platform. Both Doorbot and RATT use the authbackend database (https://github.com/makeitlabs/authbackend) to obtain their access control lists, allowing for centralized access control.
Parts
5| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C2, C3 |
| 1 | .1uF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | NHD-C0220BiZ-FS(RGB)-FBW-3VM | doorbot_lcd_pcblib:NHD-C0220BiZ-FS(RGB)-FBW-3VM | LCD1 |
Questions
What parts does the Doorbot lcd use?
5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Doorbot lcd KiCad files?
From the makeitlabs/doorbot repository on GitHub, at the commit this page was made from: the board is hardware/i2c_lcd/doorbot_lcd/doorbot_lcd.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Doorbot lcd design in my own project?
Its repository states no licence, so its author keeps all rights: ask makeitlabs before reusing the design.
More from makeitlabs/doorbot
1Similar boards
- 2 layers98 × 27 mm
- 2 layers21 × 33 mm
24g2usb pico2w
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
5 parts1.7kApache-2.0 - 2 layers53.2 × 59.6 mm
A10 OLinuXino Lime Rev B SHIELD TEMPLATE
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
5 parts1.5k - 2 layers30 × 11 mm
Main control board servo tester
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
5 parts1.1k - 2 layers78.8 × 35.3 mm
KiCadTest
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
5 parts915 - 2 layers50 × 23 mm
- 2 layers43.2 × 28.5 mm
- 2 layers20.3 × 15.2 mm
L0 light sensor
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
5 parts546MIT