2 layers104.9 × 75.2 mm
2 layers62.9 × 62.9 mm
8x8 rgb matrix V3 04
madworm/8x8_RGB_LED_Matrix_Controller17LAYOUT FILES: 8x8-RGB-LED-Matrix controller using 4x 74HC595 shift registers. CPU: ATmega168/328. Arduino 'compatible'. Runs with code from 'V3_x_boards_test' repo. KICAD and Gerber files.
- Size
- 62.9 × 62.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 91
- Pads
- 248
- Tracks, vias
- 955, 54
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 24 Nov 2010
- Updated
- 9 Jan 2015
Overview
8x8 rgb matrix V3 04 is an open-source printed circuit board by madworm, from the madworm/8x8_RGB_LED_Matrix_Controller repository on GitHub. It is a 2-layer board of 62.9 × 62.9 mm with 52 parts on 91 nets, routed with 955 tracks and 54 vias.
It is built around the ATMEGA328-PU. Its parts include 27 resistors, 6 connectors, 5 capacitors, 5 ICs and 2 switches. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.md8x8_RGB_LED_Matrix_Controller
LAYOUT FILES: 8x8-RGB-LED-Matrix controller using 4x 74HC595 shift registers. CPU: ATmega168/328. Arduino 'compatible'. Runs with code from V3_x_boards_test repo. KICAD and Gerber files.
Before having PC-boards made, please make sure you know about your manufacturer's peculiarities! Especially drill-sizes and their tolerances may vary too much and give you trouble.
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 270 | R1 | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +8 |
| 4 | 74HC595_SMD | MADW__SO16 | IC2, IC3, IC4, IC5 |
| 4 | P*** | 1pin | 1PIN-1, 1PIN-2, 1PIN-3, 1PIN-4 |
| 2 | 100nF | C1 | C3, C5 |
| 2 | 10k | R1 | R25, R27 |
| 2 | 22pF | C1 | C1, C2 |
| 1 | 16Mhz | HC49U-S | X1 |
| 1 | 1k | R1 | R26 |
| 1 | 47muF | C1.5V8H | C4 |
| 1 | 8x8_RGB | MADW__LEDSEE_8x8_RGB | MATRIX1 |
| 1 | ATMega328 | MADW__TQFP_32_7x7 | IC1 |
| 1 | FTDI | MADW__SIL-6 | P1 |
| 1 | ICSP | pin_array_3x2 | P4 |
| 1 | JMP | pin_array_3x2 | P5 |
| 1 | LED | LEDV | D1 |
| 1 | PORTC | MADW__SIL-10 | P2 |
| 1 | PORTD | MADW__SIL-10 | P3 |
| 1 | RE | MADW__SIL-2 | P6 |
| 1 | RST | MADW__LPH_SW | SW1 |
| 1 | SW | MADW__LPH_SW | SW2 |
Similar boards
- 2 layers228 × 98 mm
- 2 layers94.6 × 46.1 mm
- 2 layers50 × 50 mm
- 2 layers284.7 × 94.2 mm
Lumberjack
peej/lumberjack-keyboard
5x12 ortholinear through-hole component keyboard PCB for standard 60% cases
165 parts403MIT - 2 layers132.1 × 45.7 mm
IPoS
peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.
42 parts342 - 2 layers63.3 × 57.2 mm
- 2 layers285 × 117 mm
Questions
How big is the 8x8 rgb matrix V3 04 PCB?
It measures 62.9 × 62.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 8x8 rgb matrix V3 04 use?
52 parts, built around the ATMEGA328-PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 8x8 rgb matrix V3 04 KiCad files?
From the madworm/8x8_RGB_LED_Matrix_Controller repository on GitHub, at the commit this page was made from: the board is 8x8_rgb_matrix-V3_04.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 8x8 rgb matrix V3 04 design in my own project?
Its repository states no licence, so its author keeps all rights: ask madworm before reusing the design.