4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0
2 layers123 × 77 mm
Tapir36
madebyperce/tapir3634Minimally spaced MX ergo split
- Size
- 123 × 77 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 43
- Pads
- 250
- Tracks, vias
- 421, 19
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20210722)
- Created
- 10 Aug 2021
- Updated
- 10 Oct 2021
Overview
Tapir36 is an open-source printed circuit board by madebyperce, from the madebyperce/tapir36 repository on GitHub, published under the MIT licence. It is a 2-layer board of 123 × 77 mm with 46 parts on 43 nets, routed with 421 tracks and 19 vias.
It is built around the WS2812B. Its parts include 21 diodes, 18 switches and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdtapir36
Minimally MX-spaced reversible ergo split board
Updates
Rev 1.1 has:
- Updated diode footprint silkscreen -- easier to understand diode direction
- Updated MCU silkscreen -- easier to understand which set of holes to solder
- Moved MCU and TRRS female jack receiver up to resolve desing issue of PCB in way of TRRS jack
- Added reset switch pads
- Simplified Tapir art
- Increased font size of text
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | D_Small | perce:D_MiniMELF-DoubleSide | D1, D2, D3, D4, D5, D6, D7, D10, D11, D12, D13, D14, D15, D16, D17, D18 +2 |
| 18 | SW_Push | perce:MX-reversible-min-spacing | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18 +2 |
| 3 | WS2812B | perce:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D19, D20, D21 |
| 2 | , | ||
| 2 | Val** | foostan kbd master kicad-footprints-kbd:thread_m2 | Ref**, Ref** |
| 1 | LOGO | perce:tapir | G*** |
| 1 | ProMicro | perce:ReversibleProMicro | U2 |
| 1 | TRRS | perce:TRRS-PJ-320A-dual_slim | U1 |
Questions
How big is the Tapir36 PCB?
It measures 123 × 77 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tapir36 use?
46 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tapir36 KiCad files?
From the madebyperce/tapir36 repository on GitHub, at the commit this page was made from: the board is v1.0/kicad/tapir36.kicad_pcb and its schematic v1.0/kicad/tapir36.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tapir36 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers26 × 30 mm
Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
34 parts1.1kCC-BY-4.0 - 4 layers82.6 × 82.5 mm
- 2 layers95.3 × 161.9 mm
- 2 layers42.8 × 28.8 mm
MM Skirt
PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)
11 parts741GPL-3.0 - 2 layers149.6 × 127.1 mm
- 2 layers285.5 × 95 mm
- 2 layers177.7 × 144.5 mm
