Skip to the content
2 layers20 × 20 mmScampi, the printed circuit board in 3D

🦐Truly universal audio amp for portablizers

Size
20 × 20 mm
Copper layers
2
Thickness
1 mm
Parts
62
Nets
45
Pads
167
Tracks, vias
387, 69
Pours
3
Routed
Yes
KiCad
KiCad 9.99 (file 20260101)
Created
30 Aug 2024
Updated
12 Apr 2026

Overview

Scampi is an open-source printed circuit board by mackieks, from the mackieks/scampi repository on GitHub. It is a 2-layer board of 20 × 20 mm with 62 parts on 45 nets, routed with 387 tracks and 69 vias.

It is built around the MIC5365-1.8YC5-TR and TXU0104RUTR. Its parts include 18 capacitors, 4 resistors, 4 ICs and 1 connector. It belongs with the audio and music boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

Scampi is a truly universal OSHW audio amp for portablizers. Hardware design is tested and working. Firmware is nearly complete.

Features:

  • Low-cost 20x20mm 2-layer PCB
  • TLV320AIC3110 codec with stereo 1.3W Class-D amps and Class-AB headphone driver
  • 5V-tolerant level-shifted I2S input + analog input
  • Onboard switching 3.5mm headphone jack
  • Solder jumpers for mode selection (15 modes planned)
  • Shrimp-themed!🦐

Recommended speakers: Nintendo Switch 2 speakers

Headphone jack (remove pegs with flush cutters): PJ320D

Hardware tested and working! Firmware is nearly complete! Supported modes so far:

  • Analog input
  • SNES
  • N64
  • GameCube
  • Wii
  • Wii U
  • PS1
  • PS2
  • PS3
  • Saturn
  • Dreamcast
  • XBOX
  • Xbox 360
  • Jaguar
  • Neo Geo

License

Solderpad Hardware License v2.1

Parts

62
QtyValueFootprintReferences
12~SamacSys_Parts:pth_padTP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP21, TP22
90.1µFCapacitor_SMD:C_0402_1005MetricC2, C3, C5, C8, C9, C10, C11, C12, C18
5SolderJumper_2_OpenSamacSys_Parts:small_solder_jumperJP1, JP2, JP3, JP4, JP5
41µFCapacitor_SMD:C_0402_1005MetricC1, C4, C16, C17
44.7kResistor_SMD:R_0402_1005MetricR1, R2, R3, R4
310µFCapacitor_SMD:C_0603_1608MetricC6, C7, C13
247µFCapacitor_SMD:C_0603_1608MetricC14, C15
13.3VTestPoint:TestPoint_Pad_D1.0mmTP27
1ATTINY1616-MNRPackage_DFN_QFN:VQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mmU4
1GNDSamacSys_Parts:pth_padTP29
1GNDSamacSys_Parts:TestPoint_Pad_D0.75TP11
1GNDTestPoint:TestPoint_Pad_D1.0mmTP30
1HPLSamacSys_Parts:pth_padTP18
1HPRSamacSys_Parts:pth_padTP19
1HPSSamacSys_Parts:pth_padTP20
1MIC5365-1.8YC5-TRPackage_TO_SOT_SMD:SOT-353_SC-70-5U2
1PJ320D PinkSamacSys_Parts:Jack_3.5mm_PJ320D_HorizontalJ1
1SCLTestPoint:TestPoint_Pad_D1.0mmTP23
1SDATestPoint:TestPoint_Pad_D1.0mmTP24
1SPKL+SamacSys_Parts:pth_padTP13
1SPKL-SamacSys_Parts:pth_padTP14
1SPKR+SamacSys_Parts:pth_padTP16
1SPKR-SamacSys_Parts:pth_padTP15
1SPVDDSamacSys_Parts:pth_padTP17
1TLV320AIC3110Package_DFN_QFN:VQFN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mmU3
1TXU0104RUTRSamacSys:UQFN-12U1
1UPDITestPoint:TestPoint_Pad_D1.0mmTP28
1VOL+SamacSys_Parts:pth_padTP25
1VOL-SamacSys_Parts:pth_padTP26
1~TestPoint:TestPoint_Pad_D1.0mmTP12

Similar boards

  • 4 layers55.2 × 67.5 mmEastECHO, the printed circuit board in 3D

    EastECHO

    RoseDaggerDev/GBAWii3-Boards

    PCBs for the GBAWii3 (GBAdWiince v3) project. It included MelonLORD, EastECHO, and GhostPAW.

    74 parts
  • 2 layers21.4 × 37.6 mmESP32-iPod BLE, the printed circuit board in 3D

    ESP32-iPod BLE

    maxmacstn/iPod-Classic-6-mods

    Click the link above to see the details.

    14 parts86
  • 2 layers335 × 340.9 mmRCA Radio Telescope, the printed circuit board in 3D

    RCA Radio Telescope

    Glaubinator/Radio-Telescope-RCA

    Radio Telescope System for 1 GHz to 2 GHz Operation

    81 parts3GPL-3.0
  • 2 layers28.6 × 21.5 mmPMT9123 breakout, the printed circuit board in 3D

    PMT9123 breakout

    m-byte/PMT9123_breakout

    PMT9123 breakout board

    24 parts1
  • 4 layers100 × 100 mmTouchDrum V2.0, the printed circuit board in 3D

    TouchDrum V2.0

    JoelEB/Touch_Drum

    A repo for all thing TouchDrum Related: hardware/software files, 3D files, etc.

    143 parts
  • 2 layers48.4 × 145.2 mmWEST nrf52840 hydrophone node, the printed circuit board in 3D

    WEST nrf52840 hydrophone node

    mmontee/nrf52840_openWSN_sensor_node

    This projects goal is to implement a acoustic sensor node using the XIAO nrf52840 and openWSN.

    37 partsMIT
  • 2 layers30 × 40 mmIMU, the printed circuit board in 3D

    IMU

    someonelse20/drone

    All the files for my drone project.

    16 parts
  • 2 layers139.3 × 113.8 mmFlake L, the printed circuit board in 3D

    Flake L

    lever-tech/flake

    An open-source, wireless, split ergonomic keyboard designed to be productive, healthy, and enjoyable. [formerly Anywhy Flake]

    62 parts531CERN-OHL-W-2.0

Questions

How big is the Scampi PCB?

It measures 20 × 20 mm and has 2 copper layers, 1 mm thick.

What parts does the Scampi use?

62 parts, built around the MIC5365-1.8YC5-TR and TXU0104RUTR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Scampi KiCad files?

From the mackieks/scampi repository on GitHub, at the commit this page was made from: the board is hardware/KiCAD/scampi.kicad_pcb and its schematic hardware/KiCAD/scampi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Scampi design in my own project?

Its repository states no licence, so its author keeps all rights: ask mackieks before reusing the design.