Skip to the content
2 layers65 × 56 mmSonicator pi hat, the printed circuit board in 3D

Controlling Jubilees for Science!

Size
65 × 56 mm
Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
37
Pads
70
Tracks, vias
71, 8
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
9 Aug 2023
Updated
23 Apr 2026

Overview

Sonicator pi hat is an open-source printed circuit board by machineagency, from the machineagency/science-jubilee repository on GitHub, published under the MIT licence. It is a 2-layer board of 65 × 56 mm with 13 parts on 37 nets, routed with 71 tracks and 8 vias.

Its parts include 4 resistors, 2 connectors, 1 capacitor, 1 IC and 1 transistor.

README

tool_library/sonicator/pcb_hat/README.md

Note: see machineagency/sonication_station for more details for this solution.

Sonicator PCB

This PCB attaches on top of the Raspberry Pi enabling its GPIOs to control the Sonicator.

Fabrication

To make this pcb, you'll need to send files (usually gerbers) out to a PCB Fab house of your choice. Here are some options:

Assembly

This PCB can be assembled by hand with some tweezers, a microscope (or cheap microscope webcam), and, optionally, a stencil. Parts will need to be ordered from the BOM. (You can regenerate the BOM from the native Kicad files.)

Parts

13
QtyValueFootprintReferences
34k7Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR1, R2, R4
110kResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR3
11uFCapacitor_SMD:C_0603_1608MetricC1
12N7002Package_TO_SOT_SMD:SOT-23Q1
13pos_terminal_blockTerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_HorizontalP1
1JumperJumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mmJP1
1MCP4725Package_SO:TSOP-6_1.65x3.05mm_P0.95mmU1
1Raspberry_Pi_2_3Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_VerticalJ1

The 10 most common of 13 parts.

Similar boards

  • 2 layers40 × 20 mmUsb uart, the printed circuit board in 3D

    Usb uart

    earthtojake/text-to-cad

    Design physical products with AI

    13 parts26kMIT
  • 2 layers35 × 29 mmMagSpoofTC, the printed circuit board in 3D

    MagSpoofTC

    samyk/magspoof

    A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.

    13 parts4.2k
  • 2 layers20.6 × 23.6 mmAO-03 signal amplifier, the printed circuit board in 3D

    AO-03 signal amplifier

    fossasia/pslab-scripts

    Pocket Science Lab - Scripts for Sensor Experiments

    13 parts1.6kApache-2.0
  • 2 layers47 × 35.6 mmMX7-C-35PL C11, the printed circuit board in 3D

    MX7-C-35PL C11

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    13 parts1.2k
  • 2 layers95 × 95 mmCube batteryboard, the printed circuit board in 3D

    Cube batteryboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    13 parts1.1kGPL-3.0
  • 2 layers15.2 × 20.3 mmPt100stick, the printed circuit board in 3D

    Pt100stick

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    13 parts1.1kGPL-3.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    13 parts1kGPL-3.0

Questions

How big is the Sonicator pi hat PCB?

It measures 65 × 56 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Sonicator pi hat use?

13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Sonicator pi hat KiCad files?

From the machineagency/science-jubilee repository on GitHub, at the commit this page was made from: the board is tool_library/sonicator/pcb_hat/sonicator_pi_hat.kicad_pcb and its schematic tool_library/sonicator/pcb_hat/sonicator_pi_hat.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Sonicator pi hat design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).