
INV Board
davidmolony/MESC_FOC_ESC
MESC, Molony ESC, STM32F303 based FOC+BLDC ready, HALL, Encoder, Sensorless, single sides, 2 layer, ~90A @48V

Amplificateur audio stéréo classe D open hardware : entrées filaires et Bluetooth, DAC audiophile, pilotage par microcontrôleur STM32. Le dépôt contient l'ensemble de la conception — schémas, PCB et firmware.
Kicad Workspace is an open-source printed circuit board by maceintu, from the maceintu/Ampli-D repository on GitHub. It is a 2-layer board with 162 parts on 189 nets, routed with 94 tracks and 0 vias.
It is built around the LM5017MR, PCM1863DBTR and TPA3255DDV, with the PCM5242RHBT and TMUX1574PW among its other parts. Its parts include 91 capacitors, 42 resistors, 13 connectors, 9 ICs and 5 inductors. It belongs with the STM32 boards of this library.
Amplificateur audio stéréo classe D open hardware : entrées filaires et Bluetooth, DAC audiophile, pilotage par microcontrôleur STM32. Le dépôt contient l'ensemble de la conception — schémas, PCB et firmware.
État du projet : conception matérielle terminée côté schémas, routage du PCB en cours, firmware au stade du squelette généré (STM32CubeMX).

| Bloc | Composant principal | Rôle |
|---|---|---|
| Amplification | TI TPA3255 (DDV) | Étage de puissance classe D stéréo, filtres de sortie 10 µH / 25 A |
| DAC | TI PCM5242 | Conversion I2S → analogique différentiel, sortie directe vers l'ampli |
| Sélecteur de source | TI TMUX1574 | Aiguillage des flux I2S (filaire / Bluetooth) |
| Entrées filaires | TI PCM1863 | 3 entrées stéréo numérisées (jacks Neutrik NMJ4HFD2 + jack 3,5 mm) |
| Bluetooth | FSC-BT1058 | Réception audio sans fil (I2S) + contrôle par UART |
| Contrôle | ST STM32G030C8T6 | Sélection de source, volume/EQ via I2C, appairage BT, gestion des défauts |
| Alimentation | LM5017 · TLV76733 · LT3042 | 36–48 V d'entrée → 12 V → 3,3 V numérique + 3,3 V analogique faible bruit |
Interface utilisateur : commutateur rotatif 4 positions (source), bouton poussoir (appairage Bluetooth), 4 potentiomètres lus par l'ADC du STM32 (volume et égalisation).
Ampli-D/
├── Kicad Workspace/ # Projet KiCad 10 (schémas hiérarchiques + PCB 2 couches)
│ ├── alimentation.kicad_sch
│ ├── amplification.kicad_sch
│ ├── bluetooth.kicad_sch
│ ├── eq_and_dac.kicad_sch
│ ├── mcu.kicad_sch
│ ├── wired_input.kicad_sch
│ ├── Components Lib.kicad_sym # Symboles personnalisés
│ ├── FootPrints.pretty/ # Empreintes personnalisées
│ └── Lib Import/ # Symboles / empreintes / STEP fabricants
├── STM32 Workspace/ # Projet STM32CubeIDE (STM32G030C8T6)
│ ├── MCU.ioc # Configuration CubeMX
│ ├── Core/ # Code applicatif
│ └── Drivers/ # HAL STM32G0 + CMSIS
└── Ressources/ # Datasheets, modèles 3D, outils de calcul| Rail | Régulateur | Usage |
|---|---|---|
| 36 V / 48 V | entrée externe | PVDD du TPA3255 |
| 12 V | LM5017 (buck 100 V) | GVDD / pilotage de l'étage de puissance |
| 3,3 V | TLV76733 | Numérique (STM32, Bluetooth) |
| 3,3 V A | LT3042 (LDO ultra faible bruit) | Analogique (DAC, ADC) |
Matériel — ouvrir le projet avec KiCad 10.0 ou supérieur :
kicad "Kicad Workspace/Kicad Workspace.kicad_pro"Firmware — ouvrir STM32 Workspace/ dans STM32CubeIDE,
puis compiler et flasher via ST-Link. La configuration des périphériques se modifie depuis MCU.ioc
(I2C1, USART1, ADC1 + DMA, TIM1).
Les datasheets de tous les circuits intégrés sont regroupées dans
Ressources/Datasheet/, nommées par leur référence dans le schéma
(U1_FSC-BT1058.pdf, U5_TPA3255.pdf…). Le sous-dossier txt/ en contient le texte intégral,
balisé page par page, pour pouvoir chercher dans l'ensemble de la documentation d'un seul coup :
grep -rn "bootstrap" Ressources/Datasheet/txt/L'index Ressources/Datasheet/README.md donne pour chaque
composant son rôle, la révision du document et la page où trouver brochage, maxima absolus,
caractéristiques électriques, layout et table des registres.
Le classeur LM5017QuickStartCalculator.xls sert au dimensionnement du convertisseur.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 0.1µF/16V | Capacitor_SMD:C_0402_1005Metric | C1, C3, C7, C8, C10, C14, C15, C17, C35, C36, C82, C84, C86 |
| 9 | 10µF/25V | Capacitor_SMD:C_0805_2012Metric | C4, C9, C13, C16, C18, C34, C37, C83, C85 |
| 8 | 402 | Resistor_SMD:R_0201_0603Metric | R22, R23, R24, R25, R26, R27, R28, R29 |
| 6 | 0.01µF/16V | Capacitor_SMD:C_0402_1005Metric | C20, C21, C25, C27, C29, C31 |
| 6 | 100 | Resistor_SMD:R_01005_0402Metric | R3, R4, R6, R8, R10, R12 |
| 6 | 10µF/16V | Capacitor_SMD:C_0805_2012Metric | C11, C12, C24, C26, C28, C30 |
| 6 | 2.2K | Resistor_SMD:R_0201_0603Metric | R37, R38, R39, R40, R41, R42 |
| 5 | 47K | Resistor_SMD:R_01005_0402Metric | R1, R2, R5, R7, R9 |
| 5 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9, J10, J11, J12, J13 |
| 4 | 10nF/100V | Capacitor_SMD:C_0805_2012Metric | C50, C52, C57, C58 |
| 4 | 10µF/50V | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C60, C61, C62, C87 |
| 4 | 10µF/50V | Capacitor_THT:C_Radial_D6.3mm_H11.0mm_P2.50mm | C59, C60, C61, C62 |
| 4 | 10µH/25A | FootPrints:IND_SER2915L-103KL | L1, L2, L3, L4 |
| 4 | 1nF/100V | Capacitor_SMD:C_0201_0603Metric | C47, C51, C55, C56 |
| 4 | 1µF/100V | Capacitor_SMD:C_1206_3216Metric | C63, C64, C67, C68 |
| 4 | 1µF/100V | Capacitor_THT:C_Rect_L10.0mm_W4.0mm_P7.50mm_MKS4 | C48, C49, C53, C54 |
| 4 | 3.3/0.5W | Resistor_SMD:R_1206_3216Metric | R17, R18, R19, R20 |
| 3 | 1µF/25V | Capacitor_SMD:C_0603_1608Metric | C33, C38, C39 |
| 3 | 33nF/50V | Capacitor_SMD:C_0603_1608Metric | C44, C45, C46 |
| 3 | 4.7µF | Capacitor_SMD:C_0805_2012Metric | C71, C72, C73 |
| 3 | NMJ4HFD2 | Connector_Audio:Jack_6.35mm_Neutrik_NMJ4HFD2_Horizontal | J1, J2, J4 |
| 2 | 0.1µF | Capacitor_SMD:C_0603_1608Metric | C41, C42 |
| 2 | 1000pF/50V | Capacitor_SMD:C_0201_0603Metric | C69, C70 |
| 2 | 1000µF/63V | Capacitor_THT:CP_Radial_D16.0mm_P7.50mm | C65, C66 |
| 2 | 15pF/16V | Capacitor_SMD:C_0402_1005Metric | C22, C23 |
| 2 | 2.2µF/25V | Capacitor_SMD:C_0805_2012Metric | C2, C6 |
| 2 | 3.3 | Resistor_SMD:R_0201_0603Metric | R15, R16 |
| 1 | 0.1µF | Capacitor_SMD:C_01005_0402Metric | C32 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric | R34 |
| 1 | 100nF/100V | Capacitor_SMD:C_0805_2012Metric | C76 |
| 1 | 100nF/50V | Capacitor_SMD:C_0603_1608Metric | C80 |
| 1 | 100µH | Inductor_SMD:L_Bourns_SRR1260 | L5 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R33 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 10nF/50V | Capacitor_SMD:C_0603_1608Metric | C78 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R36 |
| 1 | 1µF/16V | Capacitor_SMD:C_0805_2012Metric | C19 |
| 1 | 1µF/25V | Capacitor_SMD:C_0805_2012Metric | C77 |
| 1 | 2.2µF/25V | Capacitor_SMD:C_0201_0603Metric | C5 |
| 1 | 2.2µF/25V | Capacitor_SMD:C_0603_1608Metric | C74 |
| 1 | 20K 1% | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | 220K | Resistor_SMD:R_0603_1608Metric | R32 |
| 1 | 22K 1% | Resistor_SMD:R_0805_2012Metric | R14 |
| 1 | 22µF/25V | Capacitor_SMD:C_1210_3225Metric | C81 |
| 1 | 294K | Resistor_SMD:R_0603_1608Metric | R31 |
| 1 | 3.3nF/50V | Capacitor_SMD:C_0603_1608Metric | C79 |
| 1 | 33.2K/1% | Resistor_SMD:R_0805_2012Metric | R30 |
| 1 | 33nF / 50V | Capacitor_SMD:C_0603_1608Metric | C43 |
| 1 | 4.7µF/100V | Capacitor_SMD:C_1210_3225Metric | C75 |
| 1 | 4.7µF/25V | Capacitor_SMD:C_0603_1608Metric | C88 |
| 1 | 47nF | Capacitor_SMD:C_0201_0603Metric | C40 |
| 1 | 499 | Resistor_SMD:R_0201_0603Metric | R21 |
| 1 | 8.87K | Resistor_SMD:R_0603_1608Metric | R35 |
| 1 | AudioJack3_Switch | Connector_Audio:Jack_3.5mm_CUI_SJ1-3535NG_Horizontal | J3 |
| 1 | Crystal | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | L+ | Connector_Wire:SolderWirePad_1x01_SMD_2x4mm | J5 |
| 1 | L- | Connector_Wire:SolderWirePad_1x01_SMD_2x4mm | J6 |
| 1 | LM5017MR | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.71x3.4mm_ThermalVias | U7 |
| 1 | LT3042xMSE | Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm | U8 |
| 1 | PCM1863DBT | Package_SO:TSSOP-30_4.4x7.8mm_P0.5mm | U2 |
| 1 | PCM5242RHBT | FootPrints:PCM5242 | U3 |
| 1 | R+ | Connector_Wire:SolderWirePad_1x01_SMD_2x4mm | J7 |
| 1 | R- | Connector_Wire:SolderWirePad_1x01_SMD_2x4mm | J8 |
| 1 | STM32G030C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U9 |
| 1 | TLV76733DRVx | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm_ThermalVias | U6 |
| 1 | TMUX1574PW | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U4 |
| 1 | TPA3255DDV | FootPrints:TPA3255 | U5 |
| 1 | ~ | FootPrints:FSC-BT1058 | U1 |
| 1 | ~ | Button_Switch_THT:SW_PUSH_6mm | SW2 |

davidmolony/MESC_FOC_ESC
MESC, Molony ESC, STM32F303 based FOC+BLDC ready, HALL, Encoder, Sensorless, single sides, 2 layer, ~90A @48V

andreadebortoli01/Irs2092S-Full-bridge
High-power 3 kW audio amplifier board based on 2 × IRS2092S drivers configured in a Full-Bridge (BTL) topology.



zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...

AndreiVladescu/ESP32-Bit-Pirate-Hardware
Carrier breaker-board for the ESP32-S3 Devkit. Works great with the ESP32-Bit-Pirate firmware.

Mage-Control-Systems-Ltd/CANBOB
A breakout board that enables USB or SPI to CAN communication using the MCP2515.

Manawyrm/QSPIBuddy
SPI NOR Flash mux - Raspberry Pi for embedded firmware development - Mux between DUT and Flasher
162 parts, built around the LM5017MR, PCM1863DBTR, TPA3255DDV and PCM5242RHBT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the maceintu/Ampli-D repository on GitHub, at the commit this page was made from: the board is Kicad Workspace/Kicad Workspace.kicad_pcb and its schematic Kicad Workspace/Kicad Workspace.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask maceintu before reusing the design.