Skip to the content
2 layers125.5 × 36 mmSuncommander SensorsModule, the printed circuit board in 3D

Suncommander SensorsModule

m47eus2/SunCommander-PCB

PCB boards for energy optimalization device. Contactors control for power switching with full optical isolation. Multiple current measurments made with current transformers.

Size
125.5 × 36 mm
Copper layers
2
Thickness
1.6 mm
Parts
48
Nets
45
Pads
157
Tracks, vias
144, 2
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
5 Mar 2026
Updated
5 Mar 2026

Overview

Suncommander SensorsModule is an open-source printed circuit board by m47eus2, from the m47eus2/SunCommander-PCB repository on GitHub. It is a 2-layer board of 125.5 × 36 mm with 48 parts on 45 nets, routed with 144 tracks and 2 vias.

It is built around the CD4051BE. Its parts include 20 resistors, 13 capacitors, 11 connectors and 2 ICs.

Main components

1

README

README.md

SunCommander-PCB

PCB boards for energy optimalization device. Contactors control for power switching with full optical isolation. Multiple current measurments made with current transformers.

Relay Module PCB Sensors Module PCB

Relay Module

Complete 8 relay module (230V 10A) controlled by I2C with full optical isolation and separate power source for relays coils

  • Relay control with full optical isolation (with PC817 optocouplers), separate power sources and LED signalization
  • Optocouplers controled by I2C pin expanders (PCF8574N) and inverting digital buffers beetween
  • Conntcts to MCU with power supply, I2C bus and buffer enable signal. Requires separate 5V power supply for relays coils control
  • High current terminal blocks

Relay Module PCB Layout Relay Module electronic diagram

Sensor Module

Helps measuring currents from 10 current transformers

  • Connects to MCU with power supply, multiplexers address pins and 2 analog signals from 2 out of 10 choosen current sensors
  • Muxing signals from each sensor by two CD4051 analog multiplexers to MCU
  • Creates biases for current measurments
  • Current transformers jack 3.5mm sockets with custom footprints

Sensors Module PCB Layout Sensors Module electronic diagram

Parts

48
QtyValueFootprintReferences
2010kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2, R3, R4, R5, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20 +4
1110uFCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11
10AudioJack3CustomFootprints:JC-128J1, J2, J3, J4, J5, J6, J7, J8, J9, J10
2100nFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mmC12, C13
2CD4051BPackage_DIP:DIP-16_W7.62mm_SocketU1, U2
1Conn_01x07Connector_JST:JST_XH_B7B-XH-A_1x07_P2.50mm_VerticalJ11

The 46 most common of 48 parts.

More from m47eus2/SunCommander-PCB

1
  • 2 layers70 × 133.5 mmSunCommander RelayModule, the printed circuit board in 3D

    SunCommander RelayModule

    m47eus2/SunCommander-PCB

    PCB boards for energy optimalization device. Contactors control for power switching with full optical isolation. Multiple current measurments made with current transformers.

    77 parts

Similar boards

  • 2 layers200 × 100 mmPolykit x voice card, the printed circuit board in 3D

    Polykit x voice card

    polykit/polykit-x-voice-card

    Schematics and PCB layout for a voice card with multimode filter for a polyphonic synthesizer

    207 parts58
  • 2 layers124.5 × 77.5 mmAutopatzer, the printed circuit board in 3D

    Autopatzer

    jes/autopatzer

    Automatic chess board

    40 parts30
  • 2 layers285 × 222.5 mmPolykit x mainboard, the printed circuit board in 3D

    Polykit x mainboard

    polykit/polykit-x-mainboard

    Schematics and PCB layout for a mainboard for an 8 voice polyphonic synthesizer

    220 parts22
  • 2 layers66 × 114.3 mmSixnavPrototype, the printed circuit board in 3D

    SixnavPrototype

    GreenCappuccino/SixnavPrototype

    testbed for 6DOF input device development

    38 parts13
  • 4 layers26.4 × 41.7 mmDspod cv1800b, the printed circuit board in 3D

    Dspod cv1800b

    emeb/dspod

    A family of boards for Eurorack DSP audio

    96 parts10MIT
  • 2 layers144.1 × 181.4 mmQuadulator, the printed circuit board in 3D

    Quadulator

    GlobalSequence/quadulator

    Quadulator - A quad LFO/ADSR envelope generator for Eurorack synthesizers

    128 parts6
  • 2 layers27.5 × 28.4 mmTiny power meter, the printed circuit board in 3D

    Tiny power meter

    ezcGman/tiny-power-meter

    A very tiny 3-phase power meter to measure your homes power consumption and report to Home Assistant!

    19 parts5
  • 2 layers213 × 128.5 mmIosefka motherboard, the printed circuit board in 3D

    Iosefka motherboard

    GlobalSequence/iosefka

    hybrid digital analog synthesizer

    124 parts5

Questions

How big is the Suncommander SensorsModule PCB?

It measures 125.5 × 36 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Suncommander SensorsModule use?

48 parts, built around the CD4051BE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Suncommander SensorsModule KiCad files?

From the m47eus2/SunCommander-PCB repository on GitHub, at the commit this page was made from: the board is pcb/Suncommander-SensorsModule/Suncommander-SensorsModule.kicad_pcb and its schematic pcb/SunCommander-RelayModule/SunCommander-RelayModule.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Suncommander SensorsModule design in my own project?

Its repository states no licence, so its author keeps all rights: ask m47eus2 before reusing the design.