
OSO SWAT C1-jig
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

Custom STM32 Devboard with STM32C031C6T6 MCU, external oscillators, SWD programming interface and basic peripherals
M47BoardV0 is an open-source printed circuit board by m47eus2, from the m47eus2/m47Board-C031 repository on GitHub. It is a 2-layer board of 40.5 × 43.5 mm with 28 parts on 50 nets, routed with 280 tracks and 61 vias.
Its parts include 11 capacitors, 6 connectors, 3 resistors, 2 ICs and 2 diodes. It belongs with the interfaces and adapters and microcontroller boards boards and the STM32 boards of this library.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C7, C9 |
| 4 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C8, C10, C11 |
| 4 | Conn_01x10 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J2, J3, J4, J5 |
| 3 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_E-Switch_TL3301NxxxxxG | SW1, SW2 |
| 1 | 32.768KHz | mc_custom_footprints:Crystal_SMD_Abracon_ABS25-4Pin_8.0x3.8mm | Y2 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 8MHz | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | STM32C031C6Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | TLV1117LV | mc_custom_footprints:SOT-223-LTV1117LV | U1 |

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

asterics/esp32_mouse_keyboard
ESP32 implementation for HID over GATT Keyboard and Mouse (Bluetooth Low Energy). Including serial API for external modules (similar to Adafruit EZKey HID)


Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
It measures 40.5 × 43.5 mm and has 2 copper layers, 1.6 mm thick.
28 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the m47eus2/m47Board-C031 repository on GitHub, at the commit this page was made from: the board is m47BoardV0.kicad_pcb and its schematic m47BoardV0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask m47eus2 before reusing the design.