
Convecta mcu
m2-eng/Convecta
A solution to boost heat pump efficiency by enhancing convection. This project adds fans to convector radiators, compensating for lower flow temperatures and optimizing heat distribution for improved energy performance.

A solution to boost heat pump efficiency by enhancing convection. This project adds fans to convector radiators, compensating for lower flow temperatures and optimizing heat distribution for improved energy performance.
Convecta is an open-source printed circuit board by m2-eng, from the m2-eng/Convecta repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 75 × 55.6 mm with 19 parts on 40 nets, routed with 154 tracks and 20 vias.
Its parts include 8 connectors, 4 capacitors, 3 ICs and 2 resistors. It belongs with the ESP32 and RISC-V boards of this library.
A smart solution to boost heat pump efficiency by enhancing convection. This project adds fans to convector radiators, compensating for lower flow temperatures and optimizing heat distribution for improved energy performance.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2, J2e1, J3, J3e1 |
| 3 | Conn_01x10_Pin | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J1e1, J1e2, J1m1 |
| 2 | Molex 0470531000 | Connector:FanPinHeader_1x04_P2.54mm_Vertical | M1, Me1 |
| 2 | optional | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 1 | 100nF | Capacitor_SMD:C_1206_3216Metric | C4 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 22uF | Capacitor_Tantalum_SMD:CP_EIA-7343-30_AVX-N_HandSolder | C3 |
| 1 | 4k87 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | Amphenol Anytek OQ0232510000G | Connector_Phoenix_MC:PhoenixContact_MC_1,5_2-G-3.81_1x02_P3.81mm_Horizontal | J5 |
| 1 | TI LM340MPX-5.0/NOPB | digikey-footprints:MP04A_TEX | U4 |
| 1 | TI TXS0101DCK | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | WS_ESP32_C6_Zero | PCM_SKC_DevKit_WaveShare:WS_ESP32_C6_Zero | U1 |

m2-eng/Convecta
A solution to boost heat pump efficiency by enhancing convection. This project adds fans to convector radiators, compensating for lower flow temperatures and optimizing heat distribution for improved energy performance.

m2-eng/Convecta
A solution to boost heat pump efficiency by enhancing convection. This project adds fans to convector radiators, compensating for lower flow temperatures and optimizing heat distribution for improved energy performance.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support


nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality


Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
It measures 75 × 55.6 mm and has 2 copper layers, 1.6 mm thick.
19 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the m2-eng/Convecta repository on GitHub, at the commit this page was made from: the board is pcb/convecta.kicad_pcb and its schematic pcb/convecta.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).