Skip to the content
2 layers100 × 40 mmCoupler, the printed circuit board in 3D

An attempt to build a complete ham radio transceiver around a Raspberry Pi

Size
100 × 40 mm
Copper layers
2
Thickness
1.6 mm
Parts
30
Nets
12
Pads
78
Tracks, vias
89, 51
Pours
5
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
2 Jan 2022
Updated
24 Nov 2024

Overview

Coupler is an open-source printed circuit board by M0LTE, from the M0LTE/pi-transceiver repository on GitHub. It is a 2-layer board of 100 × 40 mm with 30 parts on 12 nets, routed with 89 tracks and 51 vias.

It is built around the GRF1201. Its parts include 12 resistors, 8 capacitors, 4 connectors and 2 ICs. It belongs with the radio and wireless boards of this library.

Main components

1

README

README.md

pi-transceiver

An attempt to build a complete ham radio transceiver around a Raspberry Pi

image

See the wiki for a more detailed project description / scratchlist of ideas / plans.

Also see the open issues for stuff which needs working on. I've marked a few as Good First Issues.

Discussions is also a good place to ask questions / make comments / suggestions without raising an issue.

Parts

30
QtyValueFootprintReferences
12RResistor_SMD:R_0603_1608MetricR1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12
8CCapacitor_SMD:C_0603_1608MetricC1, C2, C3, C4, C5, C6, C7, C8
4MountingHoleMountingHole:MountingHole_2.2mm_M2_DIN965H1, H2, H3, H4
2Conn_01x03Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_VerticalJ3, J4
2Conn_CoaxialConnector_Coaxial:SMA_Samtec_SMA-J-P-X-ST-EM1_EdgeMountJ1, J2
2GRF1201Gorilla:DFN-6-1EP_1.5x1.5mm_P0.5mm_EP0.6x1..1mmU1, U2

More from M0LTE/pi-transceiver

12
  • 4 layers100 × 100 mmPi TX 35W PA V2, the printed circuit board in 3D

    Pi TX 35W PA V2

    M0LTE/pi-transceiver

    An attempt to build a complete ham radio transceiver around a Raspberry Pi

    185 parts15
  • 4 layers100 × 100 mmPi TX 35W PA, the printed circuit board in 3D

    Pi TX 35W PA

    M0LTE/pi-transceiver

    An attempt to build a complete ham radio transceiver around a Raspberry Pi

    161 parts15
  • 4 layers100 × 100 mmRXLNA, the printed circuit board in 3D

    RXLNA

    M0LTE/pi-transceiver

    An attempt to build a complete ham radio transceiver around a Raspberry Pi

    86 parts15
  • 2 layers100 × 100 mmRLab Keyboard, the printed circuit board in 3D

    RLab Keyboard

    M0LTE/pi-transceiver

    An attempt to build a complete ham radio transceiver around a Raspberry Pi

    71 parts15
  • 2 layers75 × 50 mmLPF Relay, the printed circuit board in 3D

    LPF Relay

    M0LTE/pi-transceiver

    An attempt to build a complete ham radio transceiver around a Raspberry Pi

    58 parts15
  • 4 layers50 × 30 mmBroadcast Filter, the printed circuit board in 3D

    Broadcast Filter

    M0LTE/pi-transceiver

    An attempt to build a complete ham radio transceiver around a Raspberry Pi

    49 parts15
  • 4 layers65 × 56 mmPi transceiver hat, the printed circuit board in 3D

    Pi transceiver hat

    M0LTE/pi-transceiver

    An attempt to build a complete ham radio transceiver around a Raspberry Pi

    40 parts15
  • 4 layers25 × 40 mmPE4302, the printed circuit board in 3D

    PE4302

    M0LTE/pi-transceiver

    An attempt to build a complete ham radio transceiver around a Raspberry Pi

    31 parts15
  • 2 layers35 × 25 mmLowPass 7mm, the printed circuit board in 3D

    LowPass 7mm

    M0LTE/pi-transceiver

    An attempt to build a complete ham radio transceiver around a Raspberry Pi

    17 parts15
  • 2 layers35 × 25 mmLowPass 10mm, the printed circuit board in 3D

    LowPass 10mm

    M0LTE/pi-transceiver

    An attempt to build a complete ham radio transceiver around a Raspberry Pi

    17 parts15
  • 2 layers30 × 50 mmRelay RF G2RL, the printed circuit board in 3D

    Relay RF G2RL

    M0LTE/pi-transceiver

    An attempt to build a complete ham radio transceiver around a Raspberry Pi

    17 parts15
  • 2 layers30 × 40 mmRelay RF G6E, the printed circuit board in 3D

    Relay RF G6E

    M0LTE/pi-transceiver

    An attempt to build a complete ham radio transceiver around a Raspberry Pi

    17 parts15

Similar boards

  • 2 layers52.2 × 52.2 mmBase promicro, the printed circuit board in 3D

    Base promicro

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    30 parts3kApache-2.0
  • 2 layers40.6 × 15.2 mmVr mmm, the printed circuit board in 3D

    Vr mmm

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    30 parts1.2k
  • 2 layers270 × 11 mmDaylight, the printed circuit board in 3D

    Daylight

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    30 parts1.1kGPL-3.0
  • 2 layers65 × 30 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    30 parts1kGPL-3.0
  • 2 layers40.5 × 58 mmInitial v, the printed circuit board in 3D

    Initial v

    tenderlove/initial-v

    It's a BMW shifter converted to a Bluetooth Keyboard that you use with Vim

    30 parts1kApache-2.0
  • 2 layers34.3 × 41.8 mmMotionCubeViewAllForces, the printed circuit board in 3D

    MotionCubeViewAllForces

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    30 parts915
  • 2 layers57.4 × 62 mmPicoWS2812, the printed circuit board in 3D

    PicoWS2812

    ErichStyger/mcuoneclipse

    McuOnEclipse projects and examples

    30 parts765
  • 2 layers52.1 × 46.8 mmFIRE TEST PANEL, the printed circuit board in 3D

    FIRE TEST PANEL

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    30 parts431

Questions

How big is the Coupler PCB?

It measures 100 × 40 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Coupler use?

30 parts, built around the GRF1201. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Coupler KiCad files?

From the M0LTE/pi-transceiver repository on GitHub, at the commit this page was made from: the board is electronics/bits'n_bobs/Couplers/Coupler/Coupler.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Coupler design in my own project?

Its repository states no licence, so its author keeps all rights: ask M0LTE before reusing the design.