6 layers62 × 77 mm
Black Body Temperature Sensor PCB
DylanLockyer/Black_Body
Electrical system for black body MKID tester
217 parts1MIT
4 layers97.6 × 75.2 mm
CM4IO2
Lystea11/Metaframe-files- Size
- 97.6 × 75.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 81
- Nets
- 238
- Pads
- 569
- Tracks, vias
- 1,197, 202
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 7 Mar 2026
- Updated
- 7 Mar 2026
Overview
CM4IO2 is an open-source printed circuit board by Lystea11, from the Lystea11/Metaframe-files repository on GitHub. It is a 4-layer board of 97.6 × 75.2 mm with 81 parts on 238 nets, routed with 1,197 tracks and 202 vias.
It is built around the LAN7800/Y9X, UPD720201K8-701-BAC-A and W25Q16JVSSIQ, with the USBLC6-2SC6, 93AA66C-I/MS and AMS1117-3.3 among its other parts. Its parts include 38 capacitors, 24 resistors, 11 ICs, 4 connectors and 2 crystals. It belongs with the Raspberry Pi (Linux) boards of this library.
Main components
11
LAN7800/Y9X
QFN-48-EP(7x7)-40℃~+85℃ 1.8V~3.3V 5Gbps USB Wake-up function、Non-volatile configuration storage QFN-48-EP(7x7) Ethernet Controllers ROHSMicrochip TechnologyInterface - Specialized
UPD720201K8-701-BAC-A
QFN-68-EP(8x8)0℃~+85℃ 3.3V 4 5Gbps USB 3.0 USB to PCI Express QFN-68-EP(8x8) USB ConvertersRenesas ElectronicsUSB Converters
W25Q16JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 10uA 133MHz 16Mbit 2.7V~3.6V 20 Years 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
93AA66C-I/MS
MSOP-8-40℃~+85℃ 1,000,000 cycles 1.8V~5.5V 200 Years 3MHz 4Kbit 6ms Built-in write enable latch (WEL)、Power-down/Power-up protection circuit SPI MSOP-8 EEPROM ROHSMicrochip TechnologyEEPROM
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
TLV75510PDRV
WSON-6-EP(2x2)-40℃~+125℃@(Tj) 1 1V 25uA 46dB@(100kHz) 5.5V 500mA 71.5uVrms 780mV@(500mA) Fixed Over Current Protection、Soft Start、Enable、Thermal Shutdown Positive WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
ABM8G-25.000MHZ-18-D2Y-T
SMD3225-4P-40℃~+85℃ 18pF 25MHz 60Ω Crystal Oscillator ±20ppm ±30ppm SMD3225-4P Crystals ROHSAbraconCrystals
GSB1C41110SSHR
USB-SMDUSB-SMD New Arrivals ROHSAmphenolUSB Connectors
M20-9990246
插件,P=2.54mm-40℃~+105℃ 1 2.54mm 2.54mm 2P 3A 3mm 6.1mm Black Brass Pin Header Through Hole Tin 插件,P=2.54mm Pin Headers ROHSHarwinPin HeadersRH100-24.000-22-EXT-TR-NS1
SMD3225-4PCrystalsRaltron
Parts
81| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 0.1µF | Capacitor_SMD:C_0402_1005Metric | C1, C12, C13, C16, C19, C20, C21, C22, C25, C26, C27, C29, C31, C32, C33, C34 +3 |
| 12 | 10kΩ | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R6, R7, R9, R14, R15, R17, R18, R19, R25 |
| 4 | 1µF | Capacitor_SMD:C_0603_1608Metric | C10, C11, C14, C15 |
| 4 | 330Ω | Resistor_SMD:R_0603_1608Metric | R21, R22, R23, R24 |
| 3 | 0.1µF | Capacitor_SMD:C_0603_1608Metric | C17, C18, C37 |
| 3 | 1.0µF low-ESR | Capacitor_SMD:C_0603_1608Metric | C23, C24, C30 |
| 2 | 18pF | Capacitor_SMD:C_0402_1005Metric | C4, C5 |
| 2 | 2250013-4 | footprints:BEL_2250013-4 | J1, J3 |
| 2 | 22pF | Capacitor_SMD:C_0402_1005Metric | C2, C3 |
| 2 | 5.1kΩ | Resistor_SMD:R_0603_1608Metric | R11, R12 |
| 2 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U5, U8 |
| 1 | 1.0 µF | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 1.60kΩ ±1% | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 100kΩ | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 10µF | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 12Ω±1% | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 2.0kΩ | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 22.0µF | Capacitor_SMD:C_0603_1608Metric | C28 |
| 1 | 220Ω @100 MHz | Inductor_SMD:L_0603_1608Metric | FB2 |
| 1 | 220Ω @100MHz | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 22µF | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 549Ω | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 820Ω | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | 93AA66C-I/MS | footprints:MSOP8_MC_MCH | U2 |
| 1 | ABM8G-25.000MHZ-18-D2Y-T | footprints:CRYSTAL_ABM8G_ABR | Y2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U10 |
| 1 | AP2112K-1.2 | Package_TO_SOT_SMD:SOT-23-5 | U11 |
| 1 | CM4001008 | footprints:MODULE_CM4001008 | U3 |
| 1 | GSB1C41110SSHR | footprints:AMPHENOL_GSB1C41110SSHR | J5 |
| 1 | LAN7800/Y9X | footprints:SQFN48_7X7_Y9X_MCH | U1 |
| 1 | M20-9990246 | footprints:HARWIN_M20-9990246 | J4 |
| 1 | RH100-24.000-22-EXT-TR-NS1 | footprints:XTAL_RH100-24.000-22-EXT-TR-NS1 | Y3 |
| 1 | TLV75510PDRV | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U6 |
| 1 | TPS259530DSGR | footprints:DSG0008A_NV | U9 |
| 1 | UPD720201K8-701-BAC-A | footprints:QFN40P800X800X90-69N | U4 |
| 1 | W25Q16JVSS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U7 |
Questions
How big is the CM4IO2 PCB?
It measures 97.6 × 75.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the CM4IO2 use?
81 parts, built around the LAN7800/Y9X, UPD720201K8-701-BAC-A, W25Q16JVSSIQ and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CM4IO2 KiCad files?
From the Lystea11/Metaframe-files repository on GitHub, at the commit this page was made from: the board is KiCad/CM4IO2.kicad_pcb and its schematic KiCad/CM4IO2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CM4IO2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Lystea11 before reusing the design.
Similar boards
- 4 layers170 × 120 mm
Cm5
YORROY123/kicad-scripted-pcb
Three KiCad 10 PCBs designed entirely as Python code with layered verification
243 parts1MIT - 4 layers115 × 82.3 mm
MainPCB
HelloAlex4/Maturitaetsarbeit-Design-and-Development-of-a-Portable-Stereoscopic-Wigglegram-Camera
Documentation of the merged wigglegram camera
288 parts12 - 4 layers118.7 × 72.5 mm
Framework ExpansionBay IO Module
XPModder/Framework-ExpansionBay
Some stuff I made for the Framework Laptop 16 Expansion Bay
90 parts3 - 4 layers60 × 70 mm
- 2 layers175 × 105 mm
Ksz9563 lan7800 switch
flannellab/AI_Design_Generation
Collection of things for AI generation of PCB designs (Components, Schematics, PCBs, Docs)
48 parts - 4 layers82.7 × 32.1 mm
UsbToGB Adapter
izzeldeenakloub/Gigabit-Ethernet-to-USB-C-Adapter
A KiCad design project for a USB-C to Gigabit Ethernet adapter and my first complete 4-layer PCB layout.
84 parts - 2 layers73 × 31.7 mm
USB3.0 To Gigabit Ethernet Adapter Design
JayTzw/Mechanical---Robotics---Electronics
CAD files, Circuit schematics & PCB designs, Robotics simulations
49 parts