
Retro programmer
lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus
Processor.6809 is an open-source printed circuit board by lynchaj, from the lynchaj/duodyne repository on GitHub. It is a 2-layer board of 235 × 160 mm with 113 parts on 366 nets, routed with 4,623 tracks and 207 vias.
It is built around the 74LS245SC, PCF8584T and 74LS670, with the 74LS04PC, 74LS14PC and 74LS157PC among its other parts. Its parts include 39 capacitors, 28 ICs, 14 connectors, 11 resistors and 6 diodes. It belongs with the retro computing and games boards and the ESP32 and FPGA and CPLD boards of this library.
duodyne is a hobbyist retrocomputer system comprised of modules on a system bus. It is specifically designed to run RomWBW, however, provides support for multiple processor architectures and has a flexible and expandable system bus.
The system bus is designed to support multiple vintage or retro computer processor architectures such as those from Intel, Zilog, Motorola, Mostek, etc. The Z80 is the primary CPU used to develop the initial round of peripherals.
Duodyne borrows heavily from previous computer systems. The form factor is similar to S-100 and VME. The bus is electrically is derived from ECB with many extensions to support other processor architectures and improved power distribution. There are multiple pins for 5V and ground. +12V and -12V are supported. 3.3V and other values can be derived on board using voltage regulators.
The plan for the system is to have balance between functionality and complexity. A single function per board has good distribution and easy expansion but leads to many boards and a large backplane which can lead to electrical and signal distribution issues. However, full integration into a single board computer reduces complexity somewhat but can make expansion difficult.
Duoodyne's bus based approach with a generous board form factor allows for a blend of integration and distribution of two or more functions per board leading to a smaller overall backplane yet retaining flexibility for easy expansion.
The duodyne core system is defined as an 4-slot or 8-slot backplane, a Z80 or other processor (currently, Z80, 65C816, and TMS9995 are supported), and a ROMRAM board. The ROMRAM memory board assumes an 8-bit data bus so CPU's with larger data busses may require dedicated memory boards. The Z80 processor includes a debugging serial port for console access. The boot ROM is included on the ROMRAM board.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 33 | 0.1u | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24 +17 |
| 6 | 74LS244 | Package_DIP:DIP-20_W7.62mm_Socket_LongPads | U6, U8, U10, U14, U17, U31 |
| 4 | 10u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C25, C26, C27, C28 |
| 4 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R5, R12, R13 |
| 4 | LED | LED_THT:LED_D3.0mm_Horizontal_O3.81mm_Z2.0mm | D2, D3, D7, D9 |
| 3 | 4700 | Resistor_THT:R_Array_SIP9 | RN1, RN4, RN5 |
| 3 | CONN_02X25 | Connector_IDC:IDC-Header_2x25_P2.54mm_Horizontal | P1, P2, P3 |
| 2 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3 |
| 2 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R6 |
| 2 | 74LS670 | Package_DIP:DIP-16_W7.62mm_Socket_LongPads | U24, U29 |
| 2 | 74LS688 | Package_DIP:DIP-20_W7.62mm_Socket_LongPads | U12, U22 |
| 2 | GAL22V10 | Package_DIP:DIP-24_W7.62mm_Socket_LongPads | U3, U9 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2 |
| 2 | NetTie_2 | NetTie:NetTie-2_THT_Pad0.3mm | NT3, NT4 |
| 1 | 10 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7 |
| 1 | 10K | Resistor_THT:R_Array_SIP9 | RN8 |
| 1 | 10KΩ | Resistor_THT:R_Array_SIP9 | RN2 |
| 1 | 1KΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9 |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D6 |
| 1 | 22u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C29 |
| 1 | 27C010 | Package_DIP:DIP-32_W15.24mm_Socket_LongPads | U5 |
| 1 | 470 | Resistor_THT:R_Array_SIP9 | RN3 |
| 1 | 470Ω | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8 |
| 1 | 47uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C46 |
| 1 | 6809 | LED_THT:LED_D3.0mm_Horizontal_O3.81mm_Z2.0mm | D4 |
| 1 | 6809 ONLY | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J3 |
| 1 | 6809 RESET | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J2 |
| 1 | 74LS04 | Package_DIP:DIP-14_W7.62mm_Socket_LongPads | U1 |
| 1 | 74LS07 | Package_DIP:DIP-14_W7.62mm_Socket_LongPads | U4 |
| 1 | 74LS08 | Package_DIP:DIP-14_W7.62mm_Socket_LongPads | U16 |
| 1 | 74LS14 | Package_DIP:DIP-14_W7.62mm_Socket_LongPads | U7 |
| 1 | 74LS157 | Package_DIP:DIP-16_W7.62mm_Socket_LongPads | U19 |
| 1 | 74LS245 | Package_DIP:DIP-20_W7.62mm_Socket_LongPads | U11 |
| 1 | 74LS374 | Package_DIP:DIP-20_W7.62mm_Socket_LongPads | U33 |
| 1 | 74LS74 | Package_DIP:DIP-14_W7.62mm_Socket_LongPads | U21 |
| 1 | BUS CPU | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | JP4 |
| 1 | CPU CLOCK | Package_DIP:DIP-14_W7.62mm_Socket_LongPads | U13 |
| 1 | DS1233 | Package_TO_SOT_THT:TO-92L_HandSolder | U15 |
| 1 | FIRQ Selection | Connector_PinHeader_2.54mm:PinHeader_2x09_P2.54mm_Vertical | J9 |
| 1 | FPANEL | Connector_IDC:IDC-Header_2x20_P2.54mm_Horizontal | J11 |
| 1 | GAL16V8 | Package_DIP:DIP-20_W7.62mm_Socket_LongPads | U2 |
| 1 | GENERATE CLOCK | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | GENERATE RESET | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | JP3 |
| 1 | I2C IRQ Selection | Connector_PinHeader_2.54mm:PinHeader_2x09_P2.54mm_Vertical | J7 |
| 1 | IO Address Select | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J1 |
| 1 | IO PORT ADDR | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | JP10 |
| 1 | IRQ Selection | Connector_PinHeader_2.54mm:PinHeader_2x09_P2.54mm_Vertical | J6 |
| 1 | MC6809 | Package_DIP:DIP-40_W15.24mm_Socket_LongPads | U28 |
| 1 | MRDY | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J10 |
| 1 | NMI Selection | Connector_PinHeader_2.54mm:PinHeader_2x09_P2.54mm_Vertical | J5 |
| 1 | PCF8584 | Package_DIP:DIP-20_W7.62mm_Socket_LongPads | U27 |
| 1 | RES SEL | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | RESET | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx58-2LFS | SW1 |
| 1 | TL16C550CFN | Package_LCC:PLCC-44_THT-Socket | U20 |
| 1 | UART CLOCK | Package_DIP:DIP-14_W7.62mm_Socket_LongPads | U18 |
| 1 | UART IRQ Selection | Connector_PinHeader_2.54mm:PinHeader_2x09_P2.54mm_Vertical | J8 |

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus


danwerner21/CortexPC
Powertran Cortex clone. PC formfactor, based on Stuart Conner's MiniCortex

Nakazoto/CenturionComputer
This is just a simple backup of all the files related to the Centurion that I have stored on my HD. The Wiki itself has far more in-depth information about the Centurion and it's individual cards.

felipesanches/Itautec_I7000_KICAD
Esquemáticos do computador Itautec I-7000 G desenhados a partir de inspeção do circuito das PCBs

frubem/NE_Delta_Schematics
Forked from https://codeberg.org/hkzlab/NE_Delta_Schematics

NeilsVintageComputers/1981_Aamber-Pegasus-2023-Revival
My first computer, this is a replica I produced from the original schematics using original old components.

RichCini/LomasBoards
Small repository of files/data related to Lomas Data Products S-100 boards.

roberto314/EVA-1_Reproduction
Recreation of the very rare K-K Systems EVA-1 Display Adapter for the Epson HX-20 Computer
It measures 235 × 160 mm and has 2 copper layers, 1.6 mm thick.
113 parts, built around the 74LS245SC, PCF8584T, 74LS670 and 74LS04PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the lynchaj/duodyne repository on GitHub, at the commit this page was made from: the board is 23 processor.6809/hardware/processor.6809.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask lynchaj before reusing the design.