2 layers66.4 × 90.9 mm
2 layers100 × 105 mm
ESP Pixel LED Controller
lukas-riffel/ESP-Pixel-LED-Controller3An open source Pixel-LED-Decoder based on WT32-ETH01 using WLED with usermods.
- Size
- 100 × 105 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 44
- Pads
- 136
- Tracks, vias
- 224, 74
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 29 Jun 2022
- Updated
- 29 Jun 2022
Overview
ESP Pixel LED Controller is an open-source printed circuit board by lukas-riffel, from the lukas-riffel/ESP-Pixel-LED-Controller repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 105 mm with 37 parts on 44 nets, routed with 224 tracks and 74 vias.
It is built around the TSR 1-2450, REE-0505S and BSS138. Its parts include 7 resistors, 7 connectors, 5 capacitors, 4 ICs and 4 switches.
Main components
3
TSR 1-2450
SIP,11.6x7.5mm-40℃~+85℃ 10.2mm 11.6mm 1A 2200uF 300uA 50mVp-p 5V 7.5mm 7V~36V 850kHz 94% Short Circuit Protection、Automatic fault recovery ±1% SIP,11.6x7.5mm DC-DC Power Modules ROHSYLPTECDC-DC Power ModulesREE-0505S
SIP,19.7x6mm1 1W 1kV 200mA 4.5V~5.5V 5V 76% SIP,19.7x6mm Isolated Power Modules ROHSRECOM PowerIsolated Power Modules
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
README
README.mdESP-Pixel-LED-Controller
An open source Pixel-LED-Decoder based on WT32-ETH01 using WLED with usermods.
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4, R5, R7, R8 |
| 4 | 430156095726 | Button_Switch_THT:WE_4301X60957X6 | S1, S2, S3, S4 |
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C5 |
| 2 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 1 | 100K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 12V INPUT | TerminalBlock_Wuerth:691102710002 | J3 |
| 1 | 5,6uH TCK141 | WT32_ETH01:TCK-141 | L1 |
| 1 | 5V INPUT | TerminalBlock_Wuerth:691102710002 | J4 |
| 1 | ADM2483xRW | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U2 |
| 1 | BSS138 | digikey-footprints:SOT-23-3 | Q1 |
| 1 | DMX_IN | Connector_Audio:Jack_XLR_Neutrik_NC5MBH-B_Horizontal | J1 |
| 1 | DMX_OUT | Connector_Audio:Jack_XLR_Neutrik_NC5FBH-B_Horizontal | J2 |
| 1 | FTDI | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J5 |
| 1 | FTDI_EN | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | JP1 |
| 1 | I2C-Display | SSD1306:128x64OLED | J6 |
| 1 | LED-Stripe | TerminalBlock_Wuerth:691243110005 | J7 |
| 1 | LM809 | Package_TO_SOT_SMD:SOT-23 | U3 |
| 1 | LOGO | Luki_Lights:Luki-Lights | G*** |
| 1 | REE-0505S | Converter_DCDC:CONV_REE-0505S | PS1 |
| 1 | TSR_1-2450 | Converter_DCDC:Converter_DCDC_TRACO_TSR-1_THT | U1 |
| 1 | WT32-ETH-01 | WT32_ETH01:WT32_ETH01 | U4 |
The 32 most common of 37 parts.
Questions
How big is the ESP Pixel LED Controller PCB?
It measures 100 × 105 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP Pixel LED Controller use?
37 parts, built around the TSR 1-2450, REE-0505S and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP Pixel LED Controller KiCad files?
From the lukas-riffel/ESP-Pixel-LED-Controller repository on GitHub, at the commit this page was made from: the board is hardware/ESP-Pixel-LED-Controller.kicad_pcb and its schematic hardware/ESP-Pixel-LED-Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP Pixel LED Controller design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers73.7 × 90.2 mm
- 4 layers76.2 × 71.1 mm
Fobosshield
GMUCERG/fobos
Flexible Open-source workBench fOr Side-channel analysis (FOBOS)
170 parts18Apache-2.0 - 4 layers72.4 × 95.3 mm
DingoPDM
corygrant/dingoPDM
Hardware - dingoPDM is an open source, affordable automotive PDM (Power Distribution Module). Pre-assembled and tested units are available or the design can be used to build a DIY version.
156 parts128MIT - 2 layers51.6 × 26.8 mm
MHI AC CTRL
hberntsen/mhi-ac-ctrl-esp32
Control MHI Airconditioning locally using your own ESP32 series chip!
8 parts74MIT - 2 layers65 × 74 mm
- 2 layers127 × 54.3 mm
- 2 layers94.8 × 67.2 mm
