2 layers50 × 70 mm
2 layers50 × 70 mm
Blinds controller
luizribeiro/blinds-controller- Size
- 50 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 19
- Pads
- 147
- Tracks, vias
- 171, 68
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 11 Apr 2021
- Updated
- 15 Dec 2023
Overview
Blinds controller is an open-source printed circuit board by luizribeiro, from the luizribeiro/blinds-controller repository on GitHub. It is a 2-layer board of 50 × 70 mm with 22 parts on 19 nets, routed with 171 tracks and 68 vias.
It is built around the ESP32-S2-WROOM-N4, MPM3610AGQV-P and ULN2003A. Its parts include 6 capacitors, 4 resistors, 4 connectors, 3 ICs and 1 switch. It belongs with the ESP32 boards of this library.
Main components
3
ESP32-S2-WROOM-N4
SMD,31x18mm-40℃~+85℃ -97dBm 19.5dBm 2.4GHz 310mA 3V~3.6V 63mA ESP32-S2 On-board PCB Antenna UART、SPI、I2C、GPIO、I2S SMD,31x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesMPM3610AGQV-P
QFN-20(3x5)-40℃~+125℃ 1 1.2A 1.6mm 2MHz 300uA 3mm 4.5V~21V 5mm 800mV~18.48V Short Circuit Protection、Over-temperature protection、Over Current Protection、Under Voltage Protection、Automatic fault recovery、Programmable output voltage、Light load efficient mode Step-down type QFN-20(3x5) DC-DC Power Modules ROHSMonolithic Power SystemsDC-DC Power Modules
ULN2003A
SOP-16-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 50V Seven channels SOP-16 Darlington Transistor Arrays ROHSUMWDarlington Transistor Arrays
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 22uF | Capacitor_SMD:C_1206_3216Metric | C2, C3 |
| 1 | 0.1uF | Capacitor_SMD:C_1206_3216Metric | C4 |
| 1 | 100k | Resistor_SMD:R_1206_3216Metric | R3 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric | R4 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric | C5 |
| 1 | 10uf | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | 1uf | Capacitor_SMD:C_1206_3216Metric | C6 |
| 1 | 24k | Resistor_SMD:R_1206_3216Metric | R2 |
| 1 | 75k | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | DC Check | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | ESP32-S2-WROOM | ESP32-S2-WROOM:XCVR_ESP32-S2-WROOM | U2 |
| 1 | JTAG | footprints:SAMTEC_FTSH-105-01-L-DV-007-K-P-TR | J4 |
| 1 | Jack-DC | Connector_BarrelJack:BarrelJack_Wuerth_6941xx301002 | J1 |
| 1 | MPM3610AGQV-P | footprints:CONV_MPM3620AGQV-P | U1 |
| 1 | RESET | footprints:PTS526 SM15 SMTR2 LFS | SW1 |
| 1 | Stepper Motor | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J2 |
| 1 | ULN2003A | Package_DIP:DIP-16_W7.62mm | U3 |
The 18 most common of 22 parts.
Questions
How big is the Blinds controller PCB?
It measures 50 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Blinds controller use?
22 parts, built around the ESP32-S2-WROOM-N4, MPM3610AGQV-P and ULN2003A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Blinds controller KiCad files?
From the luizribeiro/blinds-controller repository on GitHub, at the commit this page was made from: the board is blinds-controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Blinds controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask luizribeiro before reusing the design.
More from luizribeiro/blinds-controller
1Similar boards
- 2 layers112.7 × 114.2 mm
- 2 layers91.4 × 51.4 mm
- 2 layers65 × 70 mm
- 2 layers101.6 × 53.4 mm
- 4 layers42.3 × 51.9 mm
Vanguard new
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
93 parts915 - 2 layers155 × 80 mm
- 2 layers27.9 × 92.7 mm
- 2 layers51.1 × 30 mm
Franzininho WIFI
Franzininho/Franzininho-WIFI-dev-edition
Versão da Franzininho para teste e validação do ESP32-S2
31 parts39