
Passive rpi hub75-adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

MacrosKeyboard is an open-source printed circuit board by luispa12, from the luispa12/piPicoMacrosKeyboard repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 25 × 25 mm with 2 parts on 2 nets.
This is a macros keypad based on the RP2040 microcontroler designed by Raspberry.
Documentation still in progress.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | LOGO | gld:edd-logo | G*** |

hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

It measures 25 × 25 mm and has 2 copper layers, 1.6 mm thick.
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the luispa12/piPicoMacrosKeyboard repository on GitHub, at the commit this page was made from: the board is macrosKeyboard/macrosKeyboard.kicad_pcb and its schematic macrosKeyboard/macrosKeyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).