Skip to the content
2 layers82.5 × 66.7 mm30.007 main module PCB, the printed circuit board in 3D

30.007 main module PCB

lucyy05/30.007_main_module_PCB

Y3S1 Design Engineering Project - Engineering Product Development (EPD) 30.007: Back Documentation Sensing Monitor

Size
82.5 × 66.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
19
Pads
40
Tracks, vias
70, 0
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
3 Sep 2026
Updated
3 Sep 2026

Overview

30.007 main module PCB is an open-source printed circuit board by lucyy05, from the lucyy05/30.007_main_module_PCB repository on GitHub. It is a 2-layer board of 82.5 × 66.7 mm with 7 parts on 19 nets, routed with 70 tracks and 0 vias.

Its parts include 2 resistors, 2 ICs, 2 connectors and 1 switch. It belongs with the ESP32 boards of this library.

README

README.md

30.007 Main Module PCB

KiCad source files for the main module PCB of the 30.007 project. This is the completed trigger/control board: pressing the fire switch powers up the ESP32-S3-ZERO, which starts the solenoid firing process in the separate solenoid circuit.

How it works

  1. 12 V from the power source enters the board through the through-hole connector (J3, 3-pin Molex KK).
  2. The LM2596 buck module (U1) steps 12 V down to 4.5 V to power the ESP32-S3-ZERO (U2).
  3. SW1 (Cherry MX keyboard switch) gates power to the ESP32 — when it is on/pressed, the ESP32 powers up and begins the firing process.
  4. The rest of the connectors carry 12 V straight through to the rest of the circuit. The SMD 4-pin JST-GH connector (J2) links this board to the other circuit that drives the solenoids.

Key components

RefComponentRole
U1LM2596 moduleBuck converter: 12 V → 4.5 V
U2ESP32-S3-ZEROMain controller (receives 4.5 V)
SW1Cherry MX PCB switchFire/power switch for the ESP32
J2JST-GH 4-pin (SMD)Connection to the solenoid firing circuit
J3Molex KK 3-pin (THT)12 V power source input
R7, R810 kΩ THT resistorsI2C (SCL/SDA) pull-ups

Repository layout

PathContents
30.007_main_module_PCB.kicad_proKiCad project file (open this to start)
30.007_main_module_PCB.kicad_schSchematic
30.007_main_module_PCB.kicad_pcbPCB layout
Symbols/Custom schematic symbols (e.g. ESP32-S3-ZERO)
Footprint/Custom footprints (ESP32-S3-ZERO module, LM2596, Cherry MX)
Prod/Fabrication outputs (Gerbers + drill files)
fp-lib-table, sym-lib-tableKiCad library tables

Getting started

  1. Install KiCad (files were generated with KiCad 10).
  2. Open 30.007_main_module_PCB.kicad_pro.
  3. Browse the schematic and PCB from the project tree.

Backups, cache files, local project settings (.kicad_prl), and archive files are excluded via .gitignore.

Parts

7
QtyValueFootprintReferences
210kResistor_THT:R_Bare_Metal_Element_L12.4mm_W4.8mm_P11.40mmR7, R8
1Conn_01x03_PinConnector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_VerticalJ3
1Conn_01x04_PinConnector_JST:JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_HorizontalJ2
1ESP32-S3-ZEROLibrary:MODULE_ESP32-S3-ZEROU2
1SW_PushLibrary:SW_Cherry_MX_PCB_1.00uSW1
1~Library:LM2596U1

Similar boards

  • 2 layersEncoder, the printed circuit board in 3D

    Encoder

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    7 parts4.3kMIT
  • 2 layers40 × 20 mmSensor smd, the printed circuit board in 3D

    Sensor smd

    scottbez1/splitflap

    DIY split-flap display

    7 parts4.2k
  • 2 layers19.8 × 30 mmZ limit, the printed circuit board in 3D

    Z limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    7 parts3.7k
  • 2 layers35.6 × 58.2 mmDisplay Carrier, the printed circuit board in 3D

    Display Carrier

    AxxAxx/AxxSolder

    STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power

    7 parts1.7kGPL-3.0
  • 2 layers20.3 × 16.3 mmMap MPX, the printed circuit board in 3D

    Map MPX

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    7 parts1.2k
  • 2 layers26 × 44 mmCompact carrier board, the printed circuit board in 3D

    Compact carrier board

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    7 parts1.1k
  • 2 layers26.4 × 53.8 mmAtari pickup, the printed circuit board in 3D

    Atari pickup

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    7 parts1kGPL-3.0
  • 2 layersRj45 breakout, the printed circuit board in 3D

    Rj45 breakout

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    7 parts990GPL-3.0

Questions

How big is the 30.007 main module PCB PCB?

It measures 82.5 × 66.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the 30.007 main module PCB use?

7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 30.007 main module PCB KiCad files?

From the lucyy05/30.007_main_module_PCB repository on GitHub, at the commit this page was made from: the board is 30.007_main_module_PCB.kicad_pcb and its schematic 30.007_main_module_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the 30.007 main module PCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask lucyy05 before reusing the design.